DataSheetWiki


TGL41-24 fiches techniques PDF

General Semiconductor - SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR

Numéro de référence TGL41-24
Description SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR
Fabricant General Semiconductor 
Logo General Semiconductor 





1 Page

No Preview Available !





TGL41-24 fiche technique
TGL41-6.8 THRU TGL41-200A
SURFACE MOUNT TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 200 Volts Peak Pulse Power - 400 Watts
DO-213AB
SOLDERABLE ENDS
1st BAND
D2 D1=
0.105
0.095
(2.67)
(2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185(4.7)
D2
=
D1
+
-
0
0.008
(0.20)
1st band denotes type and positive end (cathode)
Dimensions in inches and (millimeters)
Available in uni-directional only
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
For surface mounted applications
Glass passivated junction
Excellent clamping capability
Low incremental surge resistance
Fast response time typically less than 1.0ps from
0 Volts to V(BR)
400W peak pulse capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.01%
For devices with V(BR)10V, ID are typically less
than 1.0µA
High temperature soldering guaranteed:
250°C/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-213AB molded plastic body over
passivated junction
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Blue bands denotes the cathode which is positive
with respect to the anode under normal TVS operation
Mounting Position: Any
Weight: 0.116 gram, 0.0046 ounce
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATINGS
Peak pulse power dissipation with a
10/1000µs waveform (NOTE 1, FIG. 1)
Steady state power dissipation at TL=75°C (NOTE 2)
Peak pulse current with a 10/1000µs waveform
(NOTE 1, FIG. 3)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load for unidirectional only
(JEDEC Method) (NOTE 3)
Maximum instantaneous forward voltage at 25A
for unidirectional only
Operating junction and storage temperature range
SYMBOL
PPPM
PM(AV)
IPPM
IFSM
VF
TJ, TSTG
VALUE
Minimum 400
1.0
SEE TABLE 1
40.0
3.5
-55 to +150
UNITS
Watts
Watt
Amps
Amps
Volts
°C
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pads to each terminal of 0.31 in2 (8.0 mm2) per Fig. 5
(3) Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum
1/20/99

PagesPages 4
Télécharger [ TGL41-24 ]


Fiche technique recommandé

No Description détaillée Fabricant
TGL41-20 SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR General Semiconductor
General Semiconductor
TGL41-20 Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes Diotec Semiconductor
Diotec Semiconductor
TGL41-20 500 Watt Transient Voltage Suppressor Microsemi Corporation
Microsemi Corporation
TGL41-200 SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR General Semiconductor
General Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche