|
|
Numéro de référence | U479B | ||
Description | Automotive Lamp Outage Monitor/ VT = 8 mV | ||
Fabricant | TEMIC Semiconductors | ||
Logo | |||
1 Page
U479B
Automotive Lamp Outage Monitor, VT = 8 mV
Description
The monolithic integrated bipolar circuit, U479B, is
designed as a monitor for lamp failure in automobiles.
The comparator threshold is matched to the PTC
characteristic of incandescent lamps. The threshold is
tied to V4,6 = VS – VT whereas VT = 8 mV.
If the voltage drop across shunt resistor, Rsh, exceeds
8 mV, the output is turned off, otherwise the output is
turned on. Without supply voltage or open input Pin 8, the
output is turned off. A not used comparator input must be
connected to Pin 7.
Features
D 2 kV–ESD protection
D Two comparators with common reference
D Tight threshold tolerance
D Threshold matched to PTC characteristic
of incandescent lamps
D Temperature compensated
D NPN output
D Interference and damage–protection
according to VDE 0839
D EMI protection
D Reversal polarity protection
D Load-dump protection
Ordering Information
Extended Type Number
U479B
U479B–FP
Package
DIP8
SO8
Remarks
Block Diagram
Rsh
Rsh
VS
2
Z2
4
0.6 VS
8
6
7
–
+
–
+
–
+
&
&
Lamps
1
R1 150 W
Figure 1. Schematic and application circuit
VBatt
5 OUT1
3 OUT2
95 10380
TELEFUNKEN Semiconductors
Rev. A2, 04-Feb-97
1 (5)
|
|||
Pages | Pages 5 | ||
Télécharger | [ U479B ] |
No | Description détaillée | Fabricant |
U4790B | Automotive Lamp-Outage Monitor | TEMIC |
U4791B | Automotive Lamp Outage Monitor/ VT = 53 mV | TEMIC Semiconductors |
U4791B-FP | Automotive Lamp Outage Monitor/ VT = 53 mV | TEMIC Semiconductors |
U4793B | Overload Monitoring with Resistive Load/ VT = 44.5 mV | TEMIC Semiconductors |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |