DataSheetWiki


USB50803 fiches techniques PDF

Microsemi Corporation - TVSarray Series

Numéro de référence USB50803
Description TVSarray Series
Fabricant Microsemi Corporation 
Logo Microsemi Corporation 





1 Page

No Preview Available !





USB50803 fiche technique
8700 E. Thomas Road
Scottsdale, AZ 85252
Tel: (480) 941-6300
Fax: (480) 947-1503
USB50803
thru
USB50824
DESCRIPTION (500 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged
in an SO-8 configuration giving protection to 2 Unidirectional data or
interface lines. It is designed for use in applications where protection
is required at the board level from voltage transients caused by
electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical
fast transients (EFT) per IEC 1000-4-4 and effects of secondary
lighting.
TVSarraySeries
These TVS arrays have a peak power rating of 500 watts for an
8/20µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS
DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, UNIVERSAL SERIAL BUS (USB) and I/O transceivers.
The USB508XX product provides board level protection from static electricity and other induced voltage
surges that can damage or upset sensitive circuitry.
FEATURES
Protects up to 2 unidirectional lines
Surge protection Per IEC 1000-4-2, IEC 1000-4-4
Provides electrically isolated protection
SO-8 Packaging
ULTRA LOW CAPACITANCE 3 pF
ULTRA LOW LEAKAGE
MECHANICAL
Molded SO-8 Surface Mount
Weight: 0.066 grams (approximate)
Marking: Logo, device number, date code
Pin #1 defined by DOT on top of package
MAXIMUM RATINGS
Operating Temperatures: -550C to +1500C
Storage Temperature: -550C to +1500C
Peak Pulse Power: 500 Watts (8/20 µsec, Figure 1)
Pulse Repetition Rate: <.01%
PACKAGING
Tape & Reel EIA Standard 481-1-A
13 inch reel 2,500, pieces (OPTIONAL)
Carrier tubes 95 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified
PART
NUMBER
USB50803
USB50805
USB50812
USB50815
USB50824
DEVICE
MARKING
STAND
OFF
VOLTAGE
VWM
VOLTS
MAX
AF 3.3
AG 5.0
AH 12.0
AJ 15.0
AK 24.0
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
MIN
4
6.0
13.3
16.7
26.7
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
MAX
8
10.8
19
25
44
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
MAX
11
13
26
32
57
LEAKAGE
CURRENT
ID
@ VWM
µA
MAX
200
20
1
1
1
CAPACITANCE
(f=1 MHz)
@0V
C
pF
TYP
3
3
3
3
3
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
MAX
-5
1
8
11
28
NOTE: TVS product is normally selected based on its stand off Voltage VWM. Product selected voltage should be
equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The USB508XX product is designed for transient voltage suppression protection of ESD sensitive
components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
MSC1536.PDF
ISO 9001 CERTIFIED
REV C 7/07/2000

PagesPages 2
Télécharger [ USB50803 ]


Fiche technique recommandé

No Description détaillée Fabricant
USB50803 TVSarray Series Microsemi Corporation
Microsemi Corporation
USB50803C TVSarray Series Microsemi Corporation
Microsemi Corporation
USB50805 TVSarray Series Microsemi Corporation
Microsemi Corporation
USB50805C TVSarray Series Microsemi Corporation
Microsemi Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche