|
|
Número de pieza | UPM3012 | |
Descripción | NON-ISOLATED/ 40 WATT | |
Fabricantes | Power-One | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de UPM3012 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! (888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com
UPM SERIES - NON-ISOLATED, 40 WATT
DESCRIPTION
FEATURES
UPM non-isolated DC/DC buck converters deliver high • High Power Converter
power and excellent transient response in a compact • High Efficiency
1.0” x 2.0” x 0.475” package. The UPM can provide up • Excellent Transient
to 40 Watts of output power at 12A output current, and Response
output voltages from 1.2 to 3.3V. Featuring open-
• Sense Pins
frame, 100% surface-mount construction and high
efficiency, the UPM excels in difficult thermal
environments.
• Surface-Mount
Construction
• Voltage Trim
• Low Profile
• Water Washable
TECHNICAL SPECIFICATIONS
Voltage Range
3.3 VDC Nominal
5.0 VDC Nominal
Input
Output
Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min.- Iout Max., Vin Nom.
Ripple and Noise, DC - 200 MHz
Remote Sense Headroom
Current Limit Protection Type
Current Limit Threshold Range, % of Iout Rated
Short Circuit Protection Type
Vout Ramp Up Rate, Minimum
General
Switching Frequency
Temperature Coefficient
Baseplate Operating Temperature
Storage Range
Internal Input Capacitance
Recommended External Capacitance
Input
Output
Load Capacitance Compensation
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Weight (approx.)
3.0 - 3.6 VDC
4.5 - 5.5 VDC
±1%
1% Vout
1% Vout
50 mV Pk-Pk
0.25 V
Hiccup
130%
Latching
0.5V/ms
200 kHz
50 ppm/°C
0 to +100°C
-40 to +100°C
500 µF Max.
200 µF/A Iout
200 µF/A Iout
User Selectable
95%
5 g, 10 - 55 Hz
2.9 x 106 hrs
UL, CSA, EN60950
0.9 oz
C-96
94
92
90
88
86
84
82
80
78
10
Efficiency vs. Load (5V Input)
EFF. (4.5V)
EFF. (5V)
EFF. (5.5V)
20 30 40 50 60 70 80 90 100
LOAD %
Notes
† MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet UPM3012.PDF ] |
Número de pieza | Descripción | Fabricantes |
UPM301.2 | NON-ISOLATED/ 40 WATT | Power-One |
UPM301.5 | NON-ISOLATED/ 40 WATT | Power-One |
UPM301.8 | NON-ISOLATED/ 40 WATT | Power-One |
UPM3012 | NON-ISOLATED/ 40 WATT | Power-One |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |