|
|
PDF UPG2214TB-E4-A Data sheet ( Hoja de datos )
| Número de pieza | UPG2214TB-E4-A | |
| Descripción | NECs W LOW VOLTAGE L/ S-BAND SPDT SWITCH | |
| Fabricantes | NEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de UPG2214TB-E4-A (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
NEC's ½W LOW VOLTAGE
L, S-BAND SPDT SWITCH
UPG2214TB
FEATURES
• SWITCH CONTROL VOLTAGE:
Vcont (H) = 1.8 to 5.3 V (3.0 V TYP.)
Vcont (L) = −0.2 to +0.2 V (0 V TYP.)
• LOW INSERTION LOSS:
0.25 dB TYP. @ 0.05 to 0.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
0.25 dB TYP. @ 0.5 to 1.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
0.30 dB TYP. @ 1.0 to 2.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
0.35 dB TYP. @ 2.0 to 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
0.35 dB TYP. @ 2.5 to 3.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• HIGH ISOLATION:
32 dB TYP. @ 0.05 to 0.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
28 dB TYP. @ 0.5 to 1.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
27 dB TYP. @ 1.0 to 2.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
26 dB TYP. @ 2.0 to 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
24 dB TYP. @ 2.5 to 3.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
• POWER HANDLING:
Pin (1 dB) = +27.0 dBm TYP. @ 0.5 to 3.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V
Pin (1 dB) = +20.0 dBm TYP. @ 0.5 to 3.0 GHz, Vcont (H) = 1.8 V, Vcont (L) = 0 V
DESCRIPTION
NEC's UPG2214TB is a GaAs MMIC L, S-band SPDT (Single
Pole Double Throw) switch for mobile phones and other
L, S-band applications from 0.05 to 3.0 GHz.
This device can operate from 1.8 to 5.3 V with low insertion
loss and high isolation. Performance is specified at both
1.8 V and 3.0 V.
The UPG2214TB is housed in a 6-pin super minimold
package suitable for high-density surface mounting.
APPLICATIONS
• L, S-band digital cellular and cordless telephones
• BluetoothTM , W-LAN, and WLL
• Short Range Wireless
• HIGH-DENSITY SURFACE MOUNTING:
6-pin super minimold package (2.0 × 1.25 × 0.9 mm)
• Pb FREE
ORDERING INFORMATION
Part Number
Package
UPG2214TB-E4-A 6-pin super minimold
Marking
G4J
Supplying Form
• Embossed tape 8 mm wide
• Pin 4, 5, 6 face the perforation side of the tape
• Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: UPG2214TB-A
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
California Eastern Laboratories
1 page  
UPG2214TB
EVALUATION CIRCUIT
OUTPUT2
OUTPUT1
C0 C0 Note
3 21
4 56
1,000 pF
C0
Vcont2
INPUT
Vcont1
1,000 pF
Note C0 : 0.05 to 0.5 GHz 1,000 pF
: 0.5 to 3.0 GHz 100 pF
The application circuits and their parameters are for reference only and are not intended for actual design-ins.
5 Page 
UPG2214TB
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Soldering Conditions
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
: 260°C or below
: 10 seconds or less
: 60 seconds or less
: 120±30 seconds
: 3 times
: 0.2%(Wt.) or below
Peak temperature (package surface temperature)
Time at temperature of 200°C or higher
Preheating time at 120 to 150°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
: 215°C or below
: 25 to 40 seconds
: 30 to 60 seconds
: 3 times
: 0.2%(Wt.) or below
Peak temperature (molten solder temperature)
: 260°C or below
Time at peak temperature
: 10 seconds or less
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes
: 1 time
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (pin temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
: 350°C or below
: 3 seconds or less
: 0.2%(Wt.) or below
Condition Symbol
IR260
VP215
WS260
HS350
Caution
Do not use different soldering methods together (except for partial heating).
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
12/01/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet UPG2214TB-E4-A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| UPG2214TB-E4-A | NECs W LOW VOLTAGE L/ S-BAND SPDT SWITCH | NEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |