DataSheetWiki


VDSL5100 fiches techniques PDF

Infineon Technologies - 5th Generation Single-port Standard VDSL Chip Set

Numéro de référence VDSL5100
Description 5th Generation Single-port Standard VDSL Chip Set
Fabricant Infineon Technologies 
Logo Infineon Technologies 





1 Page

No Preview Available !





VDSL5100 fiche technique
PRODUCT BRIEF
Infineon’s VDSL5100 standard VDSL single port
chip set provides highly flexible solutions for
Ethernet and ATM applications over VDSL.
Access system designers’ requirements are
addressed by providing flexible band allocation
plans and PSDs. VDSL5100 also supports Band 0
to extend VDSL services up to 4 km (13,200 ft.)
over ADSL frequencies.
Infineon’s VDSL5100 chip set uses Frequency
Division Multiplexing (FDM) and Quadrature
Amplitude Modulation (QAM) to provide simple,
low-cost, low-power, and very robust operation.
Infineon’s VDSL5100 is designed to coexist with
voice, ISDN, and other xDSL technologies in the
same bundle.
With Infineon’s software configurable VDSL5100
chip set, system vendors can use a single design
to support a wide variety of transport protocols.
The VDSL5100 is ideal for universal DSLAM
linecards and CPE designs.
Applications
VDSL5100s Frequency Division Duplexing
Interfaces
s Customer Premises Equipment
(CPE)
s DSLAM and residential gateways
s Ethernet and ATM over VDSL for
last mile access solutions
s Fiber and broadband wireless
(FDD)
s 2, 3, or 4-band operation,
including Band 0
s Dual latency support with built-in
interleaver memory
s MII/SMII/SS-SMII/RMII
compliant with the 802.3 Ethernet
specification
s ATM UTOPIA Level 1 and
Level 2, 8-bit, 33 MHz
extension over copper wire
s Multiple Dwelling/Tenant Units
(MDU/MTU) networking
s LAN extentsions up to 1,200 m
s Power Back Off
s Embedded crystal oscillator
(DCXO) for timing recovery
s 32-channel Pulse Code
Modulation (PCM), maximum
2 Mbit/s over the fast channel
(4,000 ft.)
s Upgrades of HDSL, SDSL and
ADSL systems
Features
s Ethernet and ATM single port chip
set
s Highly integrated, standard
s Spectral allocation allows noise
free operation with xDSL, ISDN,
TCM-ISDN and digital PBX
s Versatile and completely flexible
band allocations
s Backward compatibility with
Infineon’s legacy chip sets
s MII serial management interface
to access all internal registers
s External parallel host port
s Serial UART interface to a
standard serial terminal
s EEPROM interface via IIC
compliant, VDSL QAM transport
s IEEE 1149.1 JTAG test port
modem
Performance
s Low power consumption
s T1E1.4, ETSI, and ITU-T
compliant high speed VDSL PHY
applications
s Ethernet transfer over AAL5 and
s Asymmetric DS/US data rates of
70/40 Mbit/s and Symmetric data
rates up to 50 Mbit/s
s Asymmetric DS/US data rates of
Power Requirements
s 3.3 V and 1.2 V for the PEF 22818
s 1.8 V for the PEF 22815
RFC 2684
4/0.6 Mbit/s up to 4 km (13,200 ft.) s ±5 V for the PEF 22810
VDSL5100
5th Generation Single-port Standard VDSL Chip Set
VDSL5100-D, PEF 22818
4bVDSL-A, PEF 22815
VDSL-L, PEF 22810
Never stop
thinking.

PagesPages 2
Télécharger [ VDSL5100 ]


Fiche technique recommandé

No Description détaillée Fabricant
VDSL5100 5th Generation Single-port Standard VDSL Chip Set Infineon Technologies
Infineon Technologies
VDSL5100I Integrated Single-port VDSL Modem-on-Chip Infineon Technologies
Infineon Technologies

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche