DataSheetWiki


V29C51400T fiches techniques PDF

Mosel Vitelic Corp - 4 MEGABIT 262/144 x 16 BIT/524/288 x 8 BIT 5 VOLT CMOS FLASH MEMORY

Numéro de référence V29C51400T
Description 4 MEGABIT 262/144 x 16 BIT/524/288 x 8 BIT 5 VOLT CMOS FLASH MEMORY
Fabricant Mosel Vitelic Corp 
Logo Mosel Vitelic  Corp 





1 Page

No Preview Available !





V29C51400T fiche technique
MOSEL VITELIC
V29C51400T/V29C51400B
4 MEGABIT
(262,144 x 16 BIT/524,288 x 8 BIT)
5 VOLT CMOS FLASH MEMORY
PRELIMINARY
Features
s 256K x 16-bit or 512K x 8-bit Organization
s Address Access Time: 70, 90, 120 ns
s Single 5V ± 10% Power Supply
s Sector Erase Mode Operation
s 16KB Boot Block (lockable)
s 1K bytes per Sector, 512 Sectors
– Sector-Erase Cycle Time: 10ms (Max)
– Byte-Write Cycle Time: 20µs (Max)
s Minimum 10,000 Erase-Program Cycles
s Low power dissipation
– Active Read Current: 19mA (Typ)
– Active Program Current: 30mA (Typ)
– Standby Current: 100µA (Max)
s Hardware Data Protection
s Low VCC Program Inhibit Below 3.5V
s Self-timed write/erase operations with end-of-
cycle detection
– DATA Polling
– Toggle Bit
s CMOS and TTL Interface
s Available in two versions
– V29C51400T (Top Boot Block)
– V29C51400B (Bottom Boot Block)
s Packages:
– 48-pin TSOP
Description
The V29C51400T/V29C51400B is a high speed
262,144 x 16 bit or 524,288 x 8-bit CMOS flash
memory. Writing or erasing the device is done with
a single 5 Volt power supply. The device has
separate chip enable CE, write enable WE, and
output enable OE controls to eliminate bus
contention.
The V29C51400T/V29C51400B offers a combi-
nation of: Boot Block with Sector Erase/Write
Mode. The end of write/erase cycle is detected by
DATA Polling of I/O7 or by the Toggle Bit I/O6.
The V29C51400T/V29C51400B features a
sector erase operation which allows each sector to
be erased and reprogrammed without affecting
data stored in other sectors. The device also
supports full chip erase.
Boot block architecture enables the device to
boot from a protected sector located either at the
top (V29C51400T) or the bottom (V29C51400B).
All inputs and outputs are CMOS and TTL
compatible.
The V29C51400T/V29C51400B is ideal for
applications that require updatable code and data
storage.
Device Usage Chart
Operating
Temperature
Range
0°C to 70 °C
Package Outline
T
Access Time (ns)
70 90 120
•••
Temperature
Mark
Blank
V29C51400T/V29C51400B Rev. 1.5 October 2000
1

PagesPages 16
Télécharger [ V29C51400T ]


Fiche technique recommandé

No Description détaillée Fabricant
V29C51400B 4 MEGABIT 262/144 x 16 BIT/524/288 x 8 BIT 5 VOLT CMOS FLASH MEMORY Mosel Vitelic  Corp
Mosel Vitelic Corp
V29C51400T 4 MEGABIT 262/144 x 16 BIT/524/288 x 8 BIT 5 VOLT CMOS FLASH MEMORY Mosel Vitelic  Corp
Mosel Vitelic Corp

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche