DataSheetWiki


X25F032SE fiches techniques PDF

Xicor - SerialFlash Memory With Block LockTM Protection

Numéro de référence X25F032SE
Description SerialFlash Memory With Block LockTM Protection
Fabricant Xicor 
Logo Xicor 





1 Page

No Preview Available !





X25F032SE fiche technique
APPLICATION NOTE
A V A I LABLE
AN61 • AN75 • AN77 • AN79 • AN82
X25F064/032/016/008
SerialFlash™ Memory With Block LockTM Protection
FEATURES
• 1MHz Clock Rate
• SPI Serial Interface
• 64K/32K/16K/8K Bits
— 32 Byte Small Sector Program Mode
• Low Power CMOS
— <1µA Standby Current
— <5mA Active Current
• 1.8V – 3.6V or 5V “Univolt” Read and
Program Power Supply Versions
• Block Lock Protection
— Protect 1/4, 1/2, or all of E2PROM Array
• Built-in Inadvertent Program Protection
— Power-Up/Power-Down protection circuitry
— Program Enable Latch
— Program Protect Pin
• Self-Timed Program Cycle
— 5ms Program Cycle Time (Typical)
• High Reliability
— Endurance: 100,000 cycles per byte
— Data Retention: 100 Years
— ESD protection: 2000V on all pins
• 8-Lead PDlP Package
• 8-Lead 150 mil SOIC Packages
• 32K, 16K, 8K available in 14-Lead TSSOP,
64K available in 20-Lead TSSOP
DESCRIPTION
The X25F064/032/016/008 family are 8/16/32/64K-bit
CMOS SerialFlash memory, internally organized
X 8. They feature a “Univolt” Program and Read voltage,
Serial Peripheral Interface (SPI), and software protocol
allowing operation on a simple three-wire bus. The bus
signals are a clock input (SCK), plus separate data in
(SI) and data out (SO) lines. Access to the device is
controlled through a chip select (CS) input, allowing any
number of devices to share the same bus.
The X25F064/032/016/008 also features two additional
inputs that provide the end user with added flexibility. By
asserting the HOLD input, the X25F064/032/016/008
will ignore transitions on its inputs, thus allowing the host
to service higher priority interrupts. The PP input can be
used as a hardwire input to the X25F064/032/016/008
disabling all program attempts to the status register,
thus providing a mechanism for limiting end user capa-
bility of altering 0, 1/4, 1/2, or all of the memory.
The X25F064/032/016/008 utilizes Xicor’s proprietary
flash cell, providing a minimum endurance
of 100,000 cycles and a minimum data retention of
100 years.
FUNCTIONAL DIAGRAM
SI
SO
SCK
COMMAND
DECODE
AND CONTROL
LOGIC
X
DECODE
LOGIC
DATA REGISTER
SECTOR DECODE LOGIC
32 8
MEMORY
ARRAY
CS
HOLD
STATUS
REGISTER
PP
PROGRAMMING
CONTROL LOGIC
SerialFlash™ and Block Lock™ Protection are trademarks of Xicor, Inc.
© Xicor, Inc. 1995, 1996 Patents Pending
6685-3.1 8/29/96 T3/C0/D0 SH
HIGH VOLTAGE
CONTROL
6685 ILL F01.4
Characteristics subject to change without notice

PagesPages 16
Télécharger [ X25F032SE ]


Fiche technique recommandé

No Description détaillée Fabricant
X25F032S SerialFlash Memory With Block LockTM Protection Xicor
Xicor
X25F032S-5 SerialFlash Memory With Block LockTM Protection Xicor
Xicor
X25F032SE SerialFlash Memory With Block LockTM Protection Xicor
Xicor
X25F032SE-5 SerialFlash Memory With Block LockTM Protection Xicor
Xicor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche