DataSheetWiki


XC9104 fiches techniques PDF

Torex Semiconductor - Step-Up DC/DC Converters

Numéro de référence XC9104
Description Step-Up DC/DC Converters
Fabricant Torex Semiconductor 
Logo Torex Semiconductor 





1 Page

No Preview Available !





XC9104 fiche technique
XC9103/XC9104/XC9105 Series
Ceramic Capacitor Compatible, Step-up DC/DC Controllers
ETR0404_008
GreenOperation Compatible
GENERAL DESCRIPTION
The XC9103/XC9104/XC9105 series are PWM, PWM/PFM auto switching /manual switching controlled universal step-up
DC/DC converter controllers.
Output will be stable no matter which load capacitors are used but should a low ESR capacitor be used, RSENSE of about 0.1Ω
will be required and phase compensation will be achieved. This allows the use of ceramic capacitors and enables to obtain lower
output ripple and small PCB design. Tantalum and electrolytic capacitors can also be used, in which case, RSENSE becomes
unnecessary.
With 0.9V internal voltage reference and by using externally connected two resistors, output voltage can be set freely within a
range of 1.5V to 30V. The series is available in 300 kHz and 180 kHz frequencies, the size of the external components can be
reduced. 100 kHz and 500 kHz are also available in custom options.
The XC9103 offers PWM operation. The XC9104 offers PWM/PFM automatic switching operation. The PWM operation is shifted to
the PFM operation automatically at light load so that it maintains high efficiency over a wide range of load currents. The XC9105
offers both PWM and PWM/PFM auto switching operations and it can be selected by external signal.
A current limiter circuit is built-in to the IC (except with the 500 kHz version) and monitors the ripple voltage on the FB pin.
Operation is shut down when the ripple voltage is more than 250mV. The operations of the IC can be returned to normal with
a toggle of the CE pin or by turning the power supply back on.
APPLICATIONS
E-book Readers / Electronic dictionaries
Smart phones / Mobile phones
Note PCs / Tablet PCs
Digital audio equipments
Multi-function power supplies
FEATURES
Input Voltage Range : 0.9V ~ 10V
Supply Voltage Range : 1.8V ~ 10V
Output Voltage Range : 1.5V ~ 30V
Set freely with the reference voltage
0.9V(±2.0%) and two resistors
Oscillation Frequency : 100, 180, 300, 500kHz (±15%)
180, 300kHz only for XC9103/04/05B
type (with current limiter)
Output Current
Controls
: more than 400mA
(VIN=1.8V, VOUT=3.3V)
: PWM (XC9103)
PWM/PFM auto-switching (XC9104)
PWM/PFM manual switching
(XC9105)
High Efficiency
Stand-by Current
Load Capacitors
Current
Limiter Function
: 85% (TYP.)
: ISTB=1.0μA (MAX.)
: Low ESR capacitors compatible
: Operates when
ripple voltage=250mV
Also available without current limiter
(100kHz and 500kHz types are
available only without current limiter)
Packages
: SOT-25, USP-6B
Environmentally Friendly : EU RoHS Compliant, Pb Free
TYPICAL APPLICATION CIRCUIT TYPICAL PERFORMANCE
CHARACTERISTICS
1/25

PagesPages 25
Télécharger [ XC9104 ]


Fiche technique recommandé

No Description détaillée Fabricant
XC9101 PWM Controlled Step-Up DC/DC Controller Torex Semiconductor
Torex Semiconductor
XC9103 Step-Up DC/DC Converters Torex Semiconductor
Torex Semiconductor
XC9104 Step-Up DC/DC Converters Torex Semiconductor
Torex Semiconductor
XC9105 Step-Up DC/DC Converters Torex Semiconductor
Torex Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche