DataSheetWiki


ZMC4.7 fiches techniques PDF

Diotec Semiconductor - Surface mount Zener Diodes

Numéro de référence ZMC4.7
Description Surface mount Zener Diodes
Fabricant Diotec Semiconductor 
Logo Diotec Semiconductor 





1 Page

No Preview Available !





ZMC4.7 fiche technique
ZMC1 ... ZMC100
Zener-Diodes
Surface mount Zener Diodes
Zener-Dioden für die Oberflächenmontage
Version 2004-05-04
Power dissipation – Verlustleistung
500 mW
Nominal Zener voltage
Nominale Zener-Spannung
1...100 V
Glass case
Glasgehäuse
Quadro-MicroMELF
Weight approx. – Gewicht ca.
0.01 g
Dimensions / Maße in mm
Standard packaging taped and reeled
Standard Lieferform gegurtet auf Rolle
Marking:
Kennzeichnung:
The ring denotes “cathode”
The type numbers are noted only on the lable on the reel
Der Ring kennzeichnet die “Kathode”
Die Typenbezeichnungen sind nur auf dem Rollenaufkleber vermerkt
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der internationalen
Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Maximum ratings and Characteristics
Grenz- und Kennwerte
Power dissipation
Verlustleistung
TA = 25°C Ptot 500 mW 1)
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
Tj – 50...+175°C
TS – 50...+175°C
RthA < 300 K/W 1)
Thermal resistance junction to terminal
Wärmewiderstand Sperrschicht – Kontaktfläche
RthT < 70 K/W
Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite
1) Mounted on P.C. board with 25 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lötpad) an jedem Anschluß
2) Tested with pulses tp = 20 ms – Gemessen mit Impulsen tp = 20 ms
3) The ZMC1 is a diode operated in forward. Hence, the index of all parameters should be “F” instead of “Z”.
The cathode, indicated by the ring is to be connected to the negative pole.
Die ZMC1 ist eine in Durchlaß betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index
“F” anstatt “Z” zu setzten. Die durch den Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
1

PagesPages 2
Télécharger [ ZMC4.7 ]


Fiche technique recommandé

No Description détaillée Fabricant
ZMC4.3 Surface mount Zener Diodes Diotec Semiconductor
Diotec Semiconductor
ZMC4.7 Surface mount Zener Diodes Diotec Semiconductor
Diotec Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche