DataSheetWiki


P4KE51 fiches techniques PDF

Shanghai Sunrise Electronics - TVS Diode (Transient Voltage Suppressor)

Numéro de référence P4KE51
Description TVS Diode (Transient Voltage Suppressor)
Fabricant Shanghai Sunrise Electronics 
Logo Shanghai Sunrise Electronics 





1 Page

No Preview Available !





P4KE51 fiche technique
SHANGHAI SUNRISE ELECTRONICS CO., LTD.
P4KE6.8 THRU P4KE440CA
TRANSIENT VOLTAGE SUPPRESSOR
BREAKDOWN VOLTAGE:6.8-440V
PEAK PULSE POWER: 400W
TECHNICAL
SPECIFICATION
FEATURES
• 400W peak pulse power capability
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time:
typically less than 1.0ps from 0V to VBR
for unidirectional and 5.0nS for bidirectional types.
• High temperature soldering guaranteed:
265oC/10S/9.5mm lead length at 5 lbs tension
MECHANICAL DATA
• Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O recognized
flame retardant epoxy
• Polarity: Color band denotes cathode except for
unidirectional types.
• Mounting position: Any
DO - 41
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25oC ambient temperature unless otherwise specified)
RATINGS
SYMBOL
VALUE
UNITS
Peak power dissipation
(Note 1)
Pppm
Minimum 400
W
Peak pulse reverse current
(Note 1)
Ippm
See Table
A
Steady state power dissipation
(Note 2) Pm(av)
1.0
W
Peak forward surge current
(Note 3)
IFSM
40 A
Maximum instantaneous forward voltage at 50A
for unidirectional only
(Note 4)
VF
3.5/6.5
V
Operating junction and storage temperature range
TSTG,TJ
-55 to + 175
oC
Notes:
1. 10/1000µS waveform non-repetitive current pulse, and derated above Ta=25oC
2. Tl=75oC, lead length 9.5mm, Mounted on copper pad area of (40×40mm)
3. Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
4. VF=3.5V max. for devices of V(BR) 200V, and VF=5.0V max. for devices of V(BR) >200V
DEVICES FOR BIDIRECTIONAL APPLICATIONS
1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.
2. For bidirectional use 'C' or 'CA' suffix for types P4KE7.5 thru types P4KE440A
(e.g. P4KE7.5C,P4KE440CA), for unidirectional don't use 'C' suffix after types.
3. For bidirectional devices having VWM of 10 volts and less, the ID limit is doubled.
4. Electrical characteristics apply in both directions.
http://www.sse-diode.com

PagesPages 3
Télécharger [ P4KE51 ]


Fiche technique recommandé

No Description détaillée Fabricant
P4KE500A GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR Zowie Technology
Zowie Technology
P4KE500CA GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR Zowie Technology
Zowie Technology
P4KE51 TRANSIENT VOLTAGE SUPPRESSORS DIODE Jinan Gude Electronic Device
Jinan Gude Electronic Device
P4KE51 TRANSIENT ABSORPTION ZENER Microsemi Corporation
Microsemi Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche