DataSheetWiki


P4KE27CA fiches techniques PDF

Pan Jit International Inc. - GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State)

Numéro de référence P4KE27CA
Description GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State)
Fabricant Pan Jit International Inc. 
Logo Pan Jit International Inc. 





1 Page

No Preview Available !





P4KE27CA fiche technique
P4KE SERIES
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 6.8 TO 440 Volts
400 Watt Peak Power
1.0 Watt Steady State
FEATURES
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l Glass passivated chip junction in DO-41 package
l 400W surge capability at 1ms
l Excellent clamping capability
l Low zener impedance
l Fast response time: typically less
than 1.0 ps from 0 volts to BV min
l Typical IR less than 1 £gA above 10V
l High temperature soldering guaranteed:
300 ¢J /10 seconds/.375”,(9.5mm) lead
length/5lbs., (2.3kg) tension
DO-41
MECHANICAL DATA
Case: JEDEC DO-41 molded plastic
Terminals: Axial leads, solderable per
MIL-STD-202, Method 208
Polarity: Color band denoted cathode
except Bipolar
Mounting Position: Any
Weight: 0.012 ounce, 0.34 gram
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
Peak Power Dissipation at TA=25 ¢J , TP=1ms(Note 1)
Steady State Power Dissipation at TL=75 ¢J Lead
Lengths .375”,(9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load(JECED Method) (Note 3)
Operating and Storage Temperature Range
SYMBOL
PPK
PD
IFSM
TJ,TSTG
VALUE
Minimum 400
1.0
40.0
-65 to+175
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25 ¢J per Fig. 2.
2.Mounted on Copper Leaf area of 1.57in2(40mm2).
3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
UNITS
Watts
Watts
Amps
¢J

PagesPages 6
Télécharger [ P4KE27CA ]


Fiche technique recommandé

No Description détaillée Fabricant
P4KE27C 400W TRANSIENT BOLTAGE SUPPRESSORS Won-Top Electronics
Won-Top Electronics
P4KE27C GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State) Pan Jit International Inc.
Pan Jit International Inc.
P4KE27C GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR TRSYS
TRSYS
P4KE27C-LF (P4KExxx-LF) 400W TRANSIENT VOLTAGE SUPPRESSOR Sirectifier
Sirectifier

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche