DataSheetWiki


P4KE220A fiches techniques PDF

General Semiconductor - TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR

Numéro de référence P4KE220A
Description TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR
Fabricant General Semiconductor 
Logo General Semiconductor 





1 Page

No Preview Available !





P4KE220A fiche technique
P4KE6.8 THRU P4KE440CA
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 440 Volts Peak Pulse Power - 400 Watts
DO-204AL
0.107 (2.7)
0.080 (2.0)
DIA.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
Dimensions are in inches and (millimeters)
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated junction
400W peak pulse power capability with a 10/1000µs
waveform, repetition rate
(duty cycle): 0.01%
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less
than 1.0ps from 0 Volts to V(BR) for
uni-directional and 5.0ns for bi-directional types
Devices with V(BR)10V ID are typically ID less than 1.0µA
High temperature soldering guaranteed:
265°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic body over
passivated junction
Terminals: Axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: For uni-directional types the color band denotes
the cathode, which is posititive with respect to the anode
under normal TVS operation
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional use C or CA suffix for types P4KE7.5 thru types P4KE440 (e.g. P4KE7.5CA, P4KE440CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak power dissipation with a 10/1000µs waveform
(NOTE 1, FIG. 1)
Peak pulse current with a 10/1000µs waveform
(NOTE 1)
Steady state power dissipation at TL=75°C
lead lengths 0.375" (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) (NOTE 3)
Maximum instantaneous forward voltage at 25A for
unidirectional only (NOTE 4)
Operating junction and storage temperature range
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
VALUE
Minimum 400
SEE TABLE 1
1.0
40.0
3.5/5.0
-55 to +175
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
(4) VF=3.5 Volt max. for devices of V(BR)220V, and VF=5.0 Volt max. for devices of V(BR)>220V
UNITS
Watts
Amps
Watts
Amps
Volts
°C
1/20/99

PagesPages 4
Télécharger [ P4KE220A ]


Fiche technique recommandé

No Description détaillée Fabricant
P4KE220 TRANSIENT VOLTAGE SUPPRESSORS DIODE Jinan Gude Electronic Device
Jinan Gude Electronic Device
P4KE220 TRANSIENT ABSORPTION ZENER Microsemi Corporation
Microsemi Corporation
P4KE220 TVS Diode (Transient Voltage Suppressor) Diodes Incorporated
Diodes Incorporated
P4KE220 400W TRANSIENT BOLTAGE SUPPRESSORS Won-Top Electronics
Won-Top Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche