DataSheetWiki


P4KE200C fiches techniques PDF

Pan Jit International Inc. - GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State)

Numéro de référence P4KE200C
Description GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State)
Fabricant Pan Jit International Inc. 
Logo Pan Jit International Inc. 





1 Page

No Preview Available !





P4KE200C fiche technique
P4KE SERIES
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 6.8 TO 440 Volts
400 Watt Peak Power
1.0 Watt Steady State
FEATURES
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l Glass passivated chip junction in DO-41 package
l 400W surge capability at 1ms
l Excellent clamping capability
l Low zener impedance
l Fast response time: typically less
than 1.0 ps from 0 volts to BV min
l Typical IR less than 1 £gA above 10V
l High temperature soldering guaranteed:
300 ¢J /10 seconds/.375”,(9.5mm) lead
length/5lbs., (2.3kg) tension
DO-41
MECHANICAL DATA
Case: JEDEC DO-41 molded plastic
Terminals: Axial leads, solderable per
MIL-STD-202, Method 208
Polarity: Color band denoted cathode
except Bipolar
Mounting Position: Any
Weight: 0.012 ounce, 0.34 gram
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
Peak Power Dissipation at TA=25 ¢J , TP=1ms(Note 1)
Steady State Power Dissipation at TL=75 ¢J Lead
Lengths .375”,(9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load(JECED Method) (Note 3)
Operating and Storage Temperature Range
SYMBOL
PPK
PD
IFSM
TJ,TSTG
VALUE
Minimum 400
1.0
40.0
-65 to+175
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25 ¢J per Fig. 2.
2.Mounted on Copper Leaf area of 1.57in2(40mm2).
3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
UNITS
Watts
Watts
Amps
¢J

PagesPages 6
Télécharger [ P4KE200C ]


Fiche technique recommandé

No Description détaillée Fabricant
P4KE200 400 Watt Transient Voltage Suppressors 6.8 to 400 Volts Micro Commercial Components
Micro Commercial Components
P4KE200 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State) Pan Jit International Inc.
Pan Jit International Inc.
P4KE200 400 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS Bytes
Bytes
P4KE200 GPP TRANSIENT VOLTAGE SUPPRESSOR (400 WATT PEAK POWER 1.0 WATT STEADY STATE) Rectron Semiconductor
Rectron Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche