DataSheetWiki


SC16C750B fiches techniques PDF

NXP Semiconductors - 5V / 3.3V and 2.5V UART with 64-byte FIFOs

Numéro de référence SC16C750B
Description 5V / 3.3V and 2.5V UART with 64-byte FIFOs
Fabricant NXP Semiconductors 
Logo NXP Semiconductors 





1 Page

No Preview Available !





SC16C750B fiche technique
SC16C750B
5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
Rev. 05 — 17 October 2008
Product data sheet
1. General description
The SC16C750B is a Universal Asynchronous Receiver and Transmitter (UART) used for
serial data communications. Its principal function is to convert parallel data into serial
data, and vice versa. The UART can handle serial data rates up to 3 Mbit/s.
The SC16C750B is pin compatible with the TL16C750 and it will power-up to be
functionally equivalent to the 16C450. Programming of control registers enables the
added features of the SC16C750B. Some of these added features are the 64-byte receive
and transmit FIFOs, automatic hardware flow control. The selectable auto-flow control
feature significantly reduces software overload and increases system efficiency while in
FIFO mode by automatically controlling serial data flow using RTS output and CTS input
signals. The SC16C750B also provides DMA mode data transfers through FIFO trigger
levels and the TXRDY and RXRDY signals. On-board status registers provide the user
with error indications, operational status, and modem interface control. System interrupts
may be tailored to meet user requirements. An internal loopback capability allows
on-board diagnostics.
The SC16C750B operates at 5 V, 3.3 V and 2.5 V, the industrial temperature range and is
available in plastic PLCC44, LQFP64, and HVQFN32 packages.
2. Features
I Single channel
I 5 V, 3.3 V and 2.5 V operation
I 5 V tolerant on input only pins1
I Industrial temperature range (40 °C to +85 °C)
I After reset, all registers are identical to the typical 16C450 register set
I Capable of running with all existing generic 16C450 software
I Pin compatibility with the industry-standard ST16C450/550, TL16C450/550,
PC16C450/550. Software compatible with SC16C750 and TL16C750
I Up to 3 Mbit/s transmit/receive operation at 5 V, 2 Mbit/s at 3.3 V, and 1 Mbit/s at 2.5 V
I 64-byte transmit FIFO
I 64-byte receive FIFO with error flags
I Programmable auto-RTS and auto-CTS
N In auto-CTS mode, CTS controls transmitter
N In auto-RTS mode, receive FIFO contents and threshold control RTS
I Automatic hardware flow control
I Software selectable baud rate generator
1. For data bus pins D7 to D0, see Table 24 “Limiting values”.

PagesPages 30
Télécharger [ SC16C750B ]


Fiche technique recommandé

No Description détaillée Fabricant
SC16C750 Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO NXP Semiconductors
NXP Semiconductors
SC16C750B 5V / 3.3V and 2.5V UART with 64-byte FIFOs NXP Semiconductors
NXP Semiconductors
SC16C750BIA44 5 V/ 3.3 V and 2.5 V UART with 64-byte FIFOs NXP Semiconductors
NXP Semiconductors
SC16C750BIB64 5 V/ 3.3 V and 2.5 V UART with 64-byte FIFOs NXP Semiconductors
NXP Semiconductors

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche