S5G9802X01 Datasheet PDF - Samsung semiconductor
| Part Number | S5G9802X01 | |
| Description | INFRAED REMOCON RECEIVER | |
| Manufacturers | Samsung semiconductor | |
| Logo |  |
|
|
There is a preview and S5G9802X01 download ( pdf file ) link at the bottom of this page. Total 10 Pages | ||
Preview 1 page No Preview Available !
INFRAED REMOCON RECEIVER
INTRODUCTION
TheS5G9802X01 is a CMOS integrated circuit for the infrared ray
remote control transmitter function to be used with the KS9801
for receiver. It can be applied to TV, VCR, VDP, CDP and AV
controller.
The S5G9802X01 has 18 functions, and a total of 75 commands can
be transmitted. These commands are generated by continuous
keys with multiple keying and 12 commands by single shot keys.
16−DIP−300A
FEATURES
• Wide range of operating supply voltage :
VDD = 2.0V - 5V
• Low power consumption : IDS<1 m A at standby mode
• Containing ceramic oscillation circuit
• Function of multiple keying
• Adaptable to various models using custom code bits
ORDERING INFORMATION
Device
S5G9802X01-D0B0
Package
16−DIP−300A
Operating Temperature
− 20°C − + 75°C
S5G9802X01
1
|
| |
 
INFRAED REMOCON RECEIVER
S5G9802X01
FUNCTIONAL DESCRIPTION
1. OSCILLATION CIRCUIT
• The oscillation circuit is activated when any key is depressed. The ceramic resonator connected to XI, XO is
normally operated at 455kHz oscillation frequency.
fosc
XI 2
C1
3 XO
2 3 --- XI, XO Terminals
C1, C2 = 100pF
ceramic
resonator
C2
Figure 3.
2. KEY INPUT & STROBE OUTPUT
• All key input pins have a pull down resistor to VSS. 18 keys can be connected by key input K1 - K6 and 6x3
matrix by means of strobe signal ST1 - ST3.
• Multiple keying is possible for the keys connected to ST1 Line (key No. 1 - 6), and all depressed keys are
output (Output becomes continuous pulses).
• Among the strobe signal lines, priority is set in the order, ST1>ST2>ST3.
The keys connected to ST2 and ST3 lines have priority and when input is made through more than 2 keys, and
single signal is preferentially output in order of K1 - K6.
• Finally, the keys connected to ST2 and ST3 lines are for single signals and no second signal is transmitted
unless input is made again after the key is released once.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for S5G9802X01 electronic component. |
| Information | Total 10 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ S5G9802X01.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| S5G9802X01 | The function is INFRAED REMOCON RECEIVER. Samsung semiconductor | |
| S5G9802X01-D0B0 | The function is INFRAED REMOCON RECEIVER. Samsung semiconductor | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
S5G9
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||