DataSheet.es    


PDF INA3010DW Data sheet ( Hoja de datos )

Número de pieza INA3010DW
Descripción INFRARED REMOTE CONTROL TRANSMITTER RC-5
Fabricantes ETC 
Logotipo ETC Logotipo



Hay una vista previa y un enlace de descarga de INA3010DW (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! INA3010DW Hoja de datos, Descripción, Manual

INA3010
INFRARED REMOTE CONTROL
TRANSMITTER RC-5
The INA3010 is intended as a general purpose (RC-5) infrared
remote control system for use where a low voltage supply and a large
debounce time are expected. The device can generate 2048 different
commands and utilizes a keyboard with a single pole switch for each
key. The command are arranged so that 32 systems can be addressed,
each system containing 64 different commands. The keyboard
interconnection is illustrated by Fig.1.
INA3010
Low voltage requirement
Single pin oscillator
Biphase transmission technique
Test mode facility
ORDERING INFORMATION
INA3010N Plastic
INA3010DW SOIC
TA = -25° to 85° C
for all packages.
BLOCK DIAGRAM
PIN ASSIGNMENT
1

1 page




INA3010DW pdf
INA3010
MAXIMUM RATINGS*
Symbol
VCC
VIN
VOUT
IIN
IOUT
PDO
PDO
PD
Tstg
Parameter
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)*
DC Output Voltage (Referenced to GND)*
DC Input Current
DC Output Current
Maximum Power Dissipation
OSC output
other outputs
Power Dissipation in Still Air
Storage Temperature
Value
-0.5 to +8.5
-0.5 to VCC +0.5
-0.5 to VCC +0.5
±10
±10
50
100
200
-65 to +150
*VCC + 0.5 must not exceeed 9.0V..
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 85°C
SOIC Package: : - 7 mW/°C from 65° to 85°C
Unit
V
V
V
mA
mA
mW
mW
mW
°C
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
VIH
VIL
VOUT
IIN
IOL
IOH
TA
Parameter
DC Supply voltage (Reference to GND)
DC Input voltage (HIGH)
DC Input voltage (LOW)
DC Output Voltage (MDATA, DATA)
DC Input Current
DC Output Current (LOW)
pins 7,8
pins 9-13; 15-17
DC Output Current (MDATA, DATA)
Operating Temperature, All Package Types
Min
2.0
0.7VCC
0
-
-
-
-
-25
Max
7.0
VCC
0.3VCC
7.0
±10
0.6
0.3
-0.4
85
Unit
V
V
V
V
mA
mA
mA
oC
This device contains protection circuitry to guard against damage due to high static voltages or electric
fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated
voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range
GND(VIN or VOUT)VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC).
Unused outputs must be left open.
5

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet INA3010DW.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
INA3010DWINFRARED REMOTE CONTROL TRANSMITTER RC-5ETC
ETC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar