DataSheetWiki


IMP1233M fiches techniques PDF

IMP Inc - Low Power 5V/3.0V P Reset

Numéro de référence IMP1233M
Description Low Power 5V/3.0V P Reset
Fabricant IMP Inc 
Logo IMP  Inc 





1 Page

No Preview Available !





IMP1233M fiche technique
IMP1233M
POWER MANAGEMENT
Low Power, 5V/3.0V µP Reset
– Active LOW, Open-Drain Output
– 350ms Reset Period
The IMP1233M supply voltage monitor is an improved, low-power
replacement for the Dallas Semiconductor DS1233M. Maximum supply
current over temperature is a low 20µA, representing 60 percent lower
power as compared to the DS1233M.
The IMP1233M issues an active LOW reset signal whenever the moni-
tored supply is out-of-tolerance. A precision reference and comparator
circuit monitor power supply (VCC) level. Tolerance level options are
5- and 10-percent for a 5V power supply. The tolerance is 15-percent for
the 3.3V, IMP1233M. When an out-of-tolerance condition is detected, an
internal power-fail signal is generated which forces an active LOW reset
signal. After VCC returns to an in-tolerance condition, the reset signal
remains active for 350ms to allow the power supply and system micro-
processor to stabilize.
The IMP1233M is designed with a open-drain output stage and operates
over the extended industrial temperature range. Devices are available in
the compact surface mount SO-8 package.
Other low power products in this family include the IMP1810/11/12/15/
16/17 and IMP1233D.
Family Selection Guide
Part
IMP1810
IMP1811
IMP1812
IMP1815
IMP1816
IMP1817
IMP1233D
IMP1233M
RESET Voltage
(V)
4.620, 4.370, 4.120
4.620, 4.350, 4.130
4.620, 4.350, 4.130
3.060, 2.880, 2.550
3.060, 2.880, 2.550
3.060, 2.880, 2.550
4.625, 4.375, 4.125
4.625, 4.375, 2.720
RESET Time
(ms)
150
150
150
150
150
150
350
350
Output
Stage
Push-Pull
Open-Drain
Push-Pull
Push-Pull
Open-Drain
Push-Pull
Open-Drain
Open-Drain
RESET
Polarity
LOW
LOW
HIGH
LOW
LOW
HIGH
LOW
LOW
Key Features
N Improved Dallas DS1233M replacement
— 60% lower maximum supply current
N Low Supply Current
— 20µA maximum (5.5V)
— 15µA maximum (3.6V)
N Automatically restarts a microprocessor after
power failure
N 350ms reset delay after VCC returns to an
in-tolerance condition
N Active LOW power-up reset, 5kinternal pull-up
N Precision temperature-compensated voltage
reference and comparator
N Eliminates external components
N Pin function compatible with the Motorola
MC33064, MC34064, MC33164 and MC34164
N Motorola 68xxx and HC16 compatible
N Compact surface mount SO-8 package
N Operating temperature – 40°C to +85°C
Applications
N Set-top boxes
N Cellular phones
N PDAs
N Energy management systems
N Embedded control systems
N Printers
N Single board computers
Block Diagram
VCC
Supply
Tolerance
Bias
+
Reference
2000 © IMP, Inc.
IMP1233M
Delay
350ms Typical
GND
5.0k9
RESET
VCC
IMP1233M
RESET
GND
1233M_01.eps
408-432-9100/www.impweb.com
Typical Application
Microprocessor
RESET
1233M_02.eps
1

PagesPages 6
Télécharger [ IMP1233M ]


Fiche technique recommandé

No Description détaillée Fabricant
IMP1233D Low Power/ 5V/ P Reset IMP  Inc
IMP Inc
IMP1233D Low Power 5V/3.0V P Reset IMP  Inc
IMP Inc
IMP1233M Low Power 5V/3.0V P Reset IMP  Inc
IMP Inc
IMP1233M Low Power/ 5V/ P Reset IMP  Inc
IMP Inc

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche