DataSheetWiki


IDT74FCT16601ETPV fiches techniques PDF

Integrated Device Technology - FAST CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

Numéro de référence IDT74FCT16601ETPV
Description FAST CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
Fabricant Integrated Device Technology 
Logo Integrated Device Technology 





1 Page

No Preview Available !





IDT74FCT16601ETPV fiche technique
Integrated Device Technology, Inc.
FAST CMOS
18-BIT UNIVERSAL BUS
TRANSCEIVER
WITH 3-STATE OUTPUTS
IDT74FCT16601AT/CT/ET
IDT74FCT162601AT/CT/ET
PRODUCT PREVIEW
FEATURES:
bit registered transceivers are built using advanced dual metal
• Common features:
CMOS technology. These high-speed, low-power 18-bit reg-
– 0.5 MICRON CMOS Technology
istered bus transceivers combine D-type latches and D-type
– High-speed, low-power CMOS replacement for
flip-flops to allow data flow in either direction in a transparent,
ABT functions
latched or clocked mode. Each direction has an independent
Typical tSK(o) (Output Skew) < 250ps
latch enable, an independent clock with a clock enable, and an
– Low input and output leakage 1µA (max.)
independent output enable. The package is organized with a
– ESD > 2000V per MIL-STD-883, Method 3015;
flow-through signal pin organization to ease board layout. All
> 200V using machine model (C = 200pF, R = 0)
inputs are designed with hysteresis for improved noise mar-
– Packages include 25 mil pitch SSOP, 19.6 mil pitch
gin.
WTSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack This transceiver is ideally suited for high speed memory
– Extended commercial range of -40°C to +85°C
interfaces which utilize high speed synchronous writes, by
E– VCC = 5V ±10%
clocking the data into a high speed register. Reads can then
I• Features for FCT16601AT/CT/ET:
be performed in a transparent or latched mode utilizing the
– High drive outputs (-32mA IOH, 64mA IOL)
same transceiver.
V– Power off disable outputs permit “live insertion”
The FCT16601AT/CT/ET are ideally suited for driving
– Typical VOLP (Output Ground Bounce) < 1.0V at
VCC = 5V, TA = 25°C
Ehigh-capacitance loads and low-impedance backplanes. The
output buffers are designed with power off disable capability
• Features for FCT162601AT/CT/ET:
– Balanced Output Drivers: ±24mA
– Reduced system switching noise
– Typical VOLP (Output Ground Bounce) < 0.6V at
VCC = 5V,TA = 25°C
Rto allow "live insertion" of boards when used as backplane
drivers.
The FCT162601AT/CT/ET have balanced output drive
Pwith current limiting resistors. This offers low ground bounce,
minimal undershoot, and controlled output fall times–reducing
the need for external series terminating resistors. The
DESCRIPTION:
TFCT162601AT/CT/ET are plug-in replacements for the
FCT16601AT/CT/ET and ABT16601 for on-board bus inter-
The FCT16601AT/CT/ET and FCT162601AT/CT/ET 18- face applications.
CFUNCTIONAL BLOCK DIAGRAM
OEAB 1
CLKENAB 56
CLKAB 55
U
D
2
LEAB
28
LEBA
O
R30
CLKBA
PCLKENBA 29
27
OEBA
3
A1
CE
1D
C1
CLK
CE
1D
C1
CLK
54 B1
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
COMMERCIAL TEMPERATURE RANGE
©1996 Integrated Device Technology, Inc.
TO 17 OTHER CHANNELS
5.9
3247 drw 01
AUGUST 1996
DSC-3247/-
1

PagesPages 7
Télécharger [ IDT74FCT16601ETPV ]


Fiche technique recommandé

No Description détaillée Fabricant
IDT74FCT16601ETPA FAST CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS Integrated Device Technology
Integrated Device Technology
IDT74FCT16601ETPF FAST CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS Integrated Device Technology
Integrated Device Technology
IDT74FCT16601ETPV FAST CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS Integrated Device Technology
Integrated Device Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche