|
|
Numéro de référence | IDT72V14081L15PFI | ||
Description | 3.3 VOLT MULTIMEDIA FIFO | ||
Fabricant | Integrated Device Technology | ||
Logo | |||
3.3 VOLT MULTIMEDIA FIFO
256 x 8, 512 x 8,
1,024 x 8, 2,048 x 8,
and 4,096 x 8
IDT72V10081, IDT72V11081
IDT72V12081, IDT72V13081
IDT72V14081
FEATURES
• 256 x 8-bit organization array (IDT72V10081)
• 512 x 8-bit organization array (IDT72V11081)
• 1,024 x 8-bit organization array (IDT72V12081)
• 2,048 x 8-bit organization array (IDT72V13081)
• 4,096 x 8-bit organization array (IDT72V14081)
• 15 ns read/write cycle time
• 5V input tolerant
• Independent Read and Write clocks
• Empty and Full Flags signal FIFO status
• Output Enable puts output data bus in high-impedance state
• Available in 32-pin plastic Thin Quad FlatPack (TQFP)
• Industrial temperature range (–40°C to +85°C)
DESCRIPTION
The IDT72V10081/72V11081/72V12081/72V13081/72V14081 devices
are low-power First-In, First-Out (FIFO) memories with clocked read and write
controls. These devices have a 256, 512, 1,024, 2,048 and 4,096 x 8-bit
memory array, respectively. These FIFOs are applicable for a wide variety of
data buffering needs such as graphics and interprocessor communication.
These FIFOs have 8-bit input and output ports. The input port is
controlled by a free-running clock (WCLK) and Write Enable pin (WEN).
Data is written into the Multimedia FIFO on every rising clock edge when
the Write Enable pin is asserted. The output port is controlled by another
clock pin (RCLK) and Read Enable pin (REN). The Read Clock can be
tied to the Write Clock for single clock operation or the two clocks can run
asynchronous of one another for dual-clock operation. An Output Enable
pin (OE) is provided on the read port for three-state control of the output.
The Multimedia FIFOs have two fixed flags, Empty (EF) and Full (FF).
These FIFOs are fabricated using IDT's submicron CMOS technology.
FUNCTIONAL BLOCK DIAGRAM
WCLK
WEN
WRITE
CONTROL
D0 - D7
Data In
x8
FIFO ARRAY
RESET LOGIC
RS
READ
CONTROL
RCLK
REN
OE
Q0 - Q7
Data Out
x8
FLAG OUTPUTS
EF FF
6161 drw01
IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGES
1
2003 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice.
NOVEMBER 2003
DSC-6161/2
|
|||
Pages | Pages 9 | ||
Télécharger | [ IDT72V14081L15PFI ] |
No | Description détaillée | Fabricant |
IDT72V14081L15PFI | 3.3 VOLT MULTIMEDIA FIFO | Integrated Device Technology |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |