DataSheetWiki


65017 fiches techniques PDF

Micropac Industries - HIGH RELIABILITY HALL EFFECT SENSOR LATCHING OUTPUT

Numéro de référence 65017
Description HIGH RELIABILITY HALL EFFECT SENSOR LATCHING OUTPUT
Fabricant Micropac Industries 
Logo Micropac Industries 





1 Page

No Preview Available !





65017 fiche technique
65017-001
Rev A 12/17/01
HIGH RELIABILITY HALL EFFECT SENSOR
LATCHING OUTPUT
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
Wide operating temperature range -55 ºC to +150 ºC Solid state switch
High magnetic sensitivity
Motor controls
Low current CMOS Technology
Speed sensing
Wide operating voltage range 3.5 to 15 V
Angular Position sensing
Chopper stabilized amplifier minimizes amplifier
Linear Position Sensing
offset resulting in improved temperature stability
Current Sensing
DESCRIPTION
The 65017-001 Hall effect sensor detects the presence of a magnetic field and provides a switch output. It is
packaged in a hermetically sealed three pin ceramic package and can be used in many harsh environments. An
internal chopper stablized amplifier eliminates input offset voltages normally associated with bipolar devices
resulting in improved operating point stability. The output transistor will be “latched ON” in the presence of a
sufficiently strong South pole magnetic field facing the marked side of the package. The output will be “latched
OFF” in the presence of a resetting North pole magnetic field.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature.......................................................................................................................................... .-65°C to +150°C
Operating Free-Air Temperature Range ............................................................................................................. -55°C to +150°C
Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds.……......................…. ..................................................+260°C
Supply Voltage Range ............................................................................................................................................ 3.5 V to 15.0 V
Supply Current (Fault) .......................................................... ............................................................................................. 50 mA.
Power Dissipation, @ TA = 25°C (PD)…….…………………………..………………………..…………………… ...........…500 mW
MagneticFlux Density………. ................. …………………………………………..………………………………..Unlimited Output
ON Current (ISINK) .......... ………………………………………………………………………………………………………...…25mA
Package Dimensions
Schematic Diagram
1 23
REG.
HALL
CELL
1 Vcc
3 Output
2 Gnd
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, TX 75040 (972) 272 - 3571 Fax (972) 487 - 6918
www.micropac.com E-MAIL: [email protected]

PagesPages 2
Télécharger [ 65017 ]


Fiche technique recommandé

No Description détaillée Fabricant
6501 ONE-CHIP MICROCOMPUTER Commodore
Commodore
6501 8-Bit Dual Supply Translating Transceiver with 3-STATE Outputs Fairchild Semiconductor
Fairchild Semiconductor
65017 HIGH RELIABILITY HALL EFFECT SENSOR LATCHING OUTPUT Micropac Industries
Micropac Industries
65017-001 HIGH RELIABILITY HALL EFFECT SENSOR LATCHING OUTPUT Micropac Industries
Micropac Industries

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche