DataSheetWiki


IDT54FCT16841CTEB fiches techniques PDF

Integrated Device Technology - FAST CMOS 20-BIT TRANSPARENT LATCHES

Numéro de référence IDT54FCT16841CTEB
Description FAST CMOS 20-BIT TRANSPARENT LATCHES
Fabricant Integrated Device Technology 
Logo Integrated Device Technology 





1 Page

No Preview Available !





IDT54FCT16841CTEB fiche technique
Integrated Device Technology, Inc.
FAST CMOS 20-BIT
TRANSPARENT
LATCHES
IDT54/74FCT16841AT/BT/CT/ET
IDT54/74FCT162841AT/BT/CT/ET
FEATURES:
• Common features:
– 0.5 MICRON CMOS Technology
– High-speed, low-power CMOS replacement for
ABT functions
Typical tSK(o) (Output Skew) < 250ps
– Low input and output leakage 1µA (max.)
– ESD > 2000V per MIL-STD-883, Method 3015;
> 200V using machine model (C = 200pF, R = 0)
– Packages include 25 mil pitch SSOP, 19.6 mil pitch
TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack
– Extended commercial range of -40°C to +85°C
– VCC = 5V ±10%
• Features for FCT16841AT/BT/CT/ET:
– High drive outputs (-32mA IOH, 64mA IOL)
– Power off disable outputs permit “live insertion”
– Typical VOLP (Output Ground Bounce) < 1.0V at
VCC = 5V, TA = 25°C
• Features for FCT162841AT/BT/CT/ET:
– Balanced Output Drivers: ±24mA (commercial),
±16mA (military)
– Reduced system switching noise
– Typical VOLP (Output Ground Bounce) < 0.6V at
VCC = 5V,TA = 25°C
DESCRIPTION:
The FCT16841AT/BT/CT/ET and FCT162841AT/BT/CT/
ET 20-bit transparent D-type latches are built using advanced
dual metal CMOS technology. These high-speed, low-power
latches are ideal for temporary storage of data. They can be
used for implementing memory address latches, I/O ports,
and bus drivers. The Output Enable and Latch Enable controls
are organized to operate each device as two 10-bit latches or
one 20-bit latch. Flow-through organization of signal pins
simplifies layout. All inputs are designed with hysteresis for
improved noise margin.
The FCT16841AT/BT/CT/ET are ideally suited for driving
high-capacitance loads and low-impedance backplanes. The
output buffers are designed with power off disable capability
to allow "live insertion" of boards when used as backplane
drivers.
The FCT162841AT/BT/CT/ET have balanced output drive
with current limiting resistors. This offers low ground bounce,
minimal undershoot, and controlled output fall times–reducing
the need for external series terminating resistors. The
FCT162841AT/BT/CT/ET are plug-in replacements for the
FCT16841AT/BT/CT/ET and ABT16841 for on-board inter-
face applications.
FUNCTIONAL BLOCK DIAGRAM
1OE
1LE
1D1
D
C
2OE
2LE
2D1
1Q1
D
C
2Q1
TO 9 OTHER CHANNELS
2556 drw 01
TO 9 OTHER CHANNELS
2556 drw 02
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
MILITARY AND COMMERCIAL TEMPERATURE RANGES
©1996 Integrated Device Technology, Inc.
5.18
JULY 1996
DSC-2556/7
1

PagesPages 9
Télécharger [ IDT54FCT16841CTEB ]


Fiche technique recommandé

No Description détaillée Fabricant
IDT54FCT16841CTE FAST CMOS 20-BIT TRANSPARENT LATCHES Integrated Device Technology
Integrated Device Technology
IDT54FCT16841CTEB FAST CMOS 20-BIT TRANSPARENT LATCHES Integrated Device Technology
Integrated Device Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche