DataSheetWiki


IDT54FCT166245ATPVB fiches techniques PDF

Integrated Device Technology - FAST CMOS 16-BIT BIDIRECTIONAL TRANSCEIVERS

Numéro de référence IDT54FCT166245ATPVB
Description FAST CMOS 16-BIT BIDIRECTIONAL TRANSCEIVERS
Fabricant Integrated Device Technology 
Logo Integrated Device Technology 





1 Page

No Preview Available !





IDT54FCT166245ATPVB fiche technique
Integrated Device Technology, Inc.
FAST CMOS 16-BIT
BIDIRECTIONAL
TRANSCEIVERS
IDT54/74FCT16245T/AT/CT/ET
IDT54/74FCT162245T/AT/CT/ET
IDT54/74FCT166245T/AT/CT
IDT54/74FCT162H245T/AT/CT/ET
FEATURES:
DESCRIPTION:
• Common features:
The 16-bit transceivers are built using advanced dual metal
– 0.5 MICRON CMOS Technology
CMOS technology. These high-speed, low-power transceiv-
– High-speed, low-power CMOS replacement for
ers are ideal for synchronous communication between two
ABT functions
busses (A and B). The Direction and Output Enable controls
Typical tSK(o) (Output Skew) < 250ps
operate these devices as either two independent 8-bit trans-
– Low input and output leakage 1µA (max.)
ceivers or one 16-bit transceiver. The direction control pin
– ESD > 2000V per MIL-STD-883, Method 3015;
> 200V using machine model (C = 200pF, R = 0)
(xDIR) controls the direction of data flow. The output enable
pin (xOE) overrides the direction control and disables both
– Packages include 25 mil pitch SSOP, 19.6 mil pitch
ports. All inputs are designed with hysteresis for improved
TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack noise margin.
– Extended commercial range of -40°C to +85°C
The FCT16245T are ideally suited for driving high-capaci-
• Features for FCT16245T/AT/CT/ET:
tance loads and low-impedance backplanes. The output buff-
– High drive outputs (-32mA IOH, 64mA IOL)
ers are designed with power off disable capability to allow "live
– Power off disable outputs permit “live insertion”
insertion" of boards when used as backplane drivers.
– Typical VOLP (Output Ground Bounce) < 1.0V at
The FCT162245T have balanced output drive with current
VCC = 5V, TA = 25°C
limiting resistors. This offers low ground bounce, minimal
• Features for FCT162245T/AT/CT/ET:
undershoot, and controlled output fall times– reducing the
– Balanced Output Drivers: ±24mA (commercial),
need for external series terminating resistors. The
±16mA (military)
FCT162245T are plug-in replacements for the FCT16245T
– Reduced system switching noise
and ABT16245 for on-board interface applications.
– Typical VOLP (Output Ground Bounce) < 0.6V at
The FCT166245T are suited for very low noise, point-to-
VCC = 5V,TA = 25°C
point driving where there is a single receiver, or a light lumped
FUNCTIONAL BLOCK DIAGRAM
1 DIR
1OE
1A1
1B1
1A2
1B2
1A3
1B3
1A4
1B4
1A5
1B5
1A6
1B6
1A7
1B7
1A8
1B8
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
2545 drw 01
MILITARY AND COMMERCIAL TEMPERATURE RANGES
©1996 Integrated Device Technology, Inc.
5.3
2 DIR
2A1
2A2
2A3
2A4
2A5
2A6
2A7
2A8
2OE
2B1
2B2
2B3
2B4
2B5
2B6
2B7
2B8
2545 drw 02
AUGUST 1996
DSC-2545/9
1

PagesPages 10
Télécharger [ IDT54FCT166245ATPVB ]


Fiche technique recommandé

No Description détaillée Fabricant
IDT54FCT166245ATPV FAST CMOS 16-BIT BIDIRECTIONAL TRANSCEIVERS Integrated Device Technology
Integrated Device Technology
IDT54FCT166245ATPVB FAST CMOS 16-BIT BIDIRECTIONAL TRANSCEIVERS Integrated Device Technology
Integrated Device Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche