|
|
PDF EL6280C Data sheet ( Hoja de datos )
| Número de pieza | EL6280C | |
| Descripción | Dual Laser Driver with APC Amp | |
| Fabricantes | Elantec Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EL6280C (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
EL6280C - Product Brief
Dual Laser Driver with APC Amp
Features
• Read + 3Write Channel laser
driver with oscillator and fast I/V
amplifier plus a separate ROM
laser driver with oscillator
• 200V/µs I/V amplifier
• 100X gain, 100mA low noise read
channel
• 200X gain, 200mA write channel
plus two 100X gain, 100mA write
channels
• 500MHz, 100mAP-P Oscillator
• Write Rise/Fall times = 0.8ns
• Single +5V supply
Applications
• Combo CD-RW + DVD-ROM
• CD-RW to 16X
• CD-R to 32X
• Writable Optical Disk Drives
Ordering Information
Part No.
EL6280CU
EL6280CL
Temp. Range
0°C to +70°C
Package
QSOP-24
LPP-24
Outline #
MDP0040
MDP0046
General Description
The EL6280C is a combination read + 3 write level laser driver and IV
amplifier, with an extra read + oscillator ROM channel for use in dual-
laser ‘Combo’ drivers. A separate (amplitude and frequency) oscilla-
tor modulates the selected output for laser noise reduction during read
or write. All these functions are provided in a 24 lead QSOP package.
The CD pin when high selects the CD (write) laser. Positive current
supplied to the IIN lines, through a user selected resistor, allow the full
scale range of each amplifier to be matched to the full scale range of
the users control DACs. When the write laser is selected, and the
WEN pins are switched low, the respective current is summed to the
output with 1ns rise and fall times. Write channel 2 has 200mA output
capability with an 200X gain amplifier.
The 100mAP-P (max) oscillator is switched on and off by the OSCEN
line. The CD line allows the oscillator to operate at different ampli-
tudes and frequencies for each laser.
The entire chip is powered down when ENABLE is low. The user can
define the gain of the I/V amplifier. With a slew rate of 200V/µs, the
I/V amplifier can normally settle to 1% within 30ns.
Connection Diagram
1 VOUT
2 VREF
3 IINR
4 IIN2
5 RF1
6 IIN3
7 IIN4
8 RF2
9 WEN2
10 CD
11 WEN3
12 WEN4
PDIN 24
VDD 23
VDD 22
IOUT1 21
GND 20
GND 19
RAMP1 18
RAMP2 17
ENABLE 16
OSCEN 15
IOUT2 14
VDD 13
IIN2 1
RF1 2
IIN3 3
IIN4 4
RF2 5
WEN2 6
CD 7
19 VCC
18 IOUT1
17 GND
16 GND
15 RAMP1
14 RAMP2
13 ENABLE
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet EL6280C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EL6280C | Dual Laser Driver with APC Amp | Elantec Semiconductor |
| EL6280CL | Dual Laser Driver with APC Amp | Elantec Semiconductor |
| EL6280CU | Dual Laser Driver with APC Amp | Elantec Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |