DataSheetWiki


EL6272C fiches techniques PDF

Elantec Semiconductor - 1-Ch Laser Diode Driver + Oscillator

Numéro de référence EL6272C
Description 1-Ch Laser Diode Driver + Oscillator
Fabricant Elantec Semiconductor 
Logo Elantec Semiconductor 





1 Page

No Preview Available !





EL6272C fiche technique
EL6272C - Product Brief
1-Ch Laser Diode Driver + Oscillator
Features
Voltage-controlled output current
source (requiring one external set
resistor)
Current-controlled output current
source.
Rise time = 3.0 ns typ.
Fall time = 3.5 ns typ.
On-chip oscillator w/frequency
and amplitude control by use of
external resistors to ground.
Oscillator to 500 MHz typ.
Oscillator to 100 mA pk/pk typ.
Single +5V supply (±10%)
Current amplification = 100
TTL/CMOS control signals
Applications
MO drives
Mini-Disc drives
Writable optical drives
Laser diode current switching
Ordering Information
Part No
EL6272CY
Temp. Range
0°C to +70°C
Package
MSOP10
Outline #
MDP0043
General Description
The EL6272C is a single channel laser diode current amplifier that
provides controlled current to a grounded laser diode. The amplifier
can provide up to 200 mA of DC or pulsed current with switching
speeds of approximately three nanoseconds rise/fall time. The level of
the output current is set by an analog voltage applied to an external
resistor which converts the voltage into a current at the IIN pin (virtu-
ally ground). The current seen at this pin is then amplified by 100X to
become a current source at pin IOUT.
An on-chip 500 MHz oscillator is provided to allow current modula-
tion when in read mode. This is turned on when the OSCEN pin is held
high. Complete control of amplitude and frequency is set by two exter-
nal resistors connected to ground at pins RFREQ and RAMP (see
graphs in this data sheet for further explanation).
Output write current pulses are enabled when an Lsignal is applied
to the OUTEN pin.
The external resistor allows the user to accurately and independently
set the amplifier transconductance by applying a voltage to the set
resistor, without restriction on the voltage range, thus ensuring broad
voltage DAC compatibility. Alternatively, the IIN pin can be biased
from a current DAC or other current source.
Connection Diagram
ENABLE 1
IIN 2
RFREQ 3
OUTEN 4
OSCEN 5
10 VCC
9 IOUT
8 GND
7 RAMP
6 VCC
Complete Product Specifications
Elantec Technical Support:
North America: 1-888-352-6832 X 311
Asia: +85-45-682-5820
Europe: +44-18-977-6020
©2000 Elantec Semiconductor, Inc.

PagesPages 2
Télécharger [ EL6272C ]


Fiche technique recommandé

No Description détaillée Fabricant
EL6272C 1-Ch Laser Diode Driver + Oscillator Elantec Semiconductor
Elantec Semiconductor
EL6272CY 1-Ch Laser Diode Driver + Oscillator Elantec Semiconductor
Elantec Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche