|
|
PDF EL6242C Data sheet ( Hoja de datos )
| Número de pieza | EL6242C | |
| Descripción | 3-Channel Laser Diode Driver w/Oscillator & APC Amplifier | |
| Fabricantes | Elantec Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EL6242C (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
EL6242C - Product Brief
3-Channel Laser Diode Driver w/Oscillator & APC Amplifier
Features
• Shrink-Small Outline Package
• Voltage-controlled output current
source requiring one external set
resistor per channel
• Rise time = 0.8ns
• Fall time = 0.8ns
• On chip oscillator with frequency
and amplitude control by use of
external resistors to ground
• Oscillator to 500MHz
• Oscillator to 100mA pk/pk
• Single +5V supply (±10%)
• Disable feature for power-up
protection and power savings
• Fast Settling APC Amplifier
Applications
• CD-RW applications
• Writable optical drives
• Laser diode current switching
Ordering Information
Part No.
EL6242CU
EL6242CL
Temp. Range
0°C to +70°C
0°C to +70°C
Package
QSOP-24
LPP-24
Outline #
MDP0040
MDP0046
General Description
The EL6242C is a high-performance three channel laser driver that
provides controlled current to a grounded laser diode. Write channels
2 and 3 should be used as the write channels, with switching speeds of
approximately one nanosecond rise/fall time. All three channels are
summed together at the IOUT output, allowing the user to create multi-
level waveforms in order to optimize laser diode performance. The
level of the output current is set by an analog voltage applied to an
external resistor which converts the voltage into a current at the IIN pin
(virtually ground). The current seen at this pin is then amplified to
become a current source at pin IOUT.
An on-chip 500MHz oscillator is provided to allow output current
modulation when in any mode. This is turned on when the OSCEN pin
is held high. Complete control of amplitude and frequency is set by
two external resistors connected to ground at pins RFREQ and RAMP
(see graphs in this data sheet for further explanation).
The EL6242C also includes a fast settling APC amplifier designed to
interface directly with the front end monitor diode and the sample-
and-hold amplifier for read and write power control. Its 100MHz
bandwidth and 30ns settling time enable up to 16X CD-RW design.
Connection Diagrams
1 VOUT
PDIN 24
2 VREF
VCC 23
3 GND
VCC 22
4 IINR
IOUT 21
5 IIN2
IOUT 20
6 IIN3
GND 19
7 RFREQ
GND 18
8 GND
RAMP 17
9 GND
ENABLE 16
10 WEN3
OSCEN 15
11 WEN2
VCC 14
12 GND
GND 13
IINR 1
IIN2 2
IIN3 3
RFREQ 4
GND 5
GND 6
WEN3 7
Thermal Pad
19 VCC
18 IOUT
17 IOUT
16 GND
15 GND
14 RAMP
13 ENABLE
24-Pin QSOP
24-Pin LPP Top View
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet EL6242C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EL6242C | 3-Channel Laser Diode Driver w/Oscillator & APC Amplifier | Elantec Semiconductor |
| EL6242CL | 3-Channel Laser Diode Driver w/Oscillator & APC Amplifier | Elantec Semiconductor |
| EL6242CU | 3-Channel Laser Diode Driver w/Oscillator & APC Amplifier | Elantec Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |