DataSheetWiki


EL5397CU-T13 fiches techniques PDF

Elantec Semiconductor - Triple 200MHz Fixed Gain Amplifier

Numéro de référence EL5397CU-T13
Description Triple 200MHz Fixed Gain Amplifier
Fabricant Elantec Semiconductor 
Logo Elantec Semiconductor 





1 Page

No Preview Available !





EL5397CU-T13 fiche technique
EL5397C - Preliminary
Triple 200MHz Fixed Gain Amplifier
Features
• Gain selectable (+1, -1, +2)
• 200MHz -3dB bandwidth (AV = 1,
2)
• 4mA supply current (per amplifier)
• Single and dual supply operation,
from 5V to 10V
• Available in 16-pin QSOP package
• Single (EL5197C) available
• 400MHz, 9mA product available
(EL5196C, EL5396C)
Applications
• Battery-powered Equipment
• Hand-held, Portable Devices
• Video Amplifiers
• Cable Drivers
• RGB Amplifiers
• Test Equipment
• Instrumentation
• Current to Voltage Converters
General Description
The EL5397C is a triple channel, fixed gain amplifier with a band-
width of 200MHz, making these amplifiers ideal for today’s high
speed video and monitor applications. The EL5397C features integnal
gain setting resistors and can be configured in a gain of +1, -1 or +2.
The same bandwidth is seen in both gain-of-1 and gain-of-2
applications.
With a supply current of just 4mA per amplifier and the ability to run
from a single supply voltage from 5V to 10V, these amplifiers are also
ideal for hand held, portable or battery powered equipment.
For applications where board space is critical, the EL5397C is offered
in the 16-pin QSOP package, as well as a 16-pin SO. The EL5397C is
specified for operation over the full industrial temperature range of ---
-40°C to +85°C.
Pin Configurations
Ordering Information
Part No
EL5397CS
EL5397CS-T7
EL5397CS-T13
EL5397CU
EL5397CU-T13
Package
16-Pin SO
16-Pin SO
16-Pin SO
16-Pin QSOP
16-Pin QSOP
Tape &
Reel
-
7”
13”
-
13”
Outline #
MDP0027
MDP0027
MDP0027
MDP0040
MDP0040
16-Pin SO & QSOP
INA+ 1
16 INA-
NC* 2
VS- 3
NC* 4
INB+ 5
-
+
+
-
15 OUTA
14 VS+
13 OUTB
12 INB-
NC 6
NC* 7
INC+ 8
+
-
11 NC
10 OUTC
9 INC-
EL5397CS, EL5397CU
* This pin must be left disconnected
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.

PagesPages 14
Télécharger [ EL5397CU-T13 ]


Fiche technique recommandé

No Description détaillée Fabricant
EL5397CU-T13 Triple 200MHz Fixed Gain Amplifier Elantec Semiconductor
Elantec Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche