DataSheetWiki


EL5146CS fiches techniques PDF

Elantec Semiconductor - 100 MHz Single Supply Rail to Rail Amplifier

Numéro de référence EL5146CS
Description 100 MHz Single Supply Rail to Rail Amplifier
Fabricant Elantec Semiconductor 
Logo Elantec Semiconductor 





1 Page

No Preview Available !





EL5146CS fiche technique
EL5144C, EL5146C, EL5244C,
EL5246C, EL5444C
100 MHz Single Supply Rail to Rail Amplifier
Features
• Rail to Rail Output Swing
5V
0V
• -3 dB Bandwidth = 100 MHz
• Single Supply +5V operation
• Power Down to 2.6 µA
• Large Input Common Mode Range
0V < VCM < 3.5 V
• Diff Gain/Phase = 0.1%/0.1°
• Low Power 35mW per amplifier
• Space Saving SOT23-5, MSOP-
8&10, & QSOP-16 packaging
Applications
• Video Amplifier
• 5 Volt Analog Signal Processing
• Multiplexer
• Line Driver
• Portable Computers
• High Speed Communications
• Sample & Hold Amplifier
• Comparator
Ordering Information
Part No
EL5144CW
EL5146CN
EL5146CS
EL5244CN
EL5244CS
EL5244CY
EL5246CN
EL5246CS
EL5246CY
EL5444CN
EL5444CS
EL5444CU
Temp. Range
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
Package
5 Pin SOT23
8 Pin PDIP
8 Pin SOIC
8 Pin PDIP
8 Pin SOIC
8 Pin MSOP
14 Pin PDIP
14 Pin SOIC
10 Pin MSOP
14 Pin PDIP
14 Pin SOIC
16 Pin QSOP
© 1998 Elantec, Inc.
Outline #
MDP0038
MDP0031
MDP0027
MDP0031
MDP0027
MDP0043
MDP0031
MDP0027
MDP0043
MDP0031
MDP0027
MDP0040
General Description
The EL5144C series amplifiers are voltage feedback, high speed, rail
to rail amplifiers designed to operate on a single +5V supply. They
offer unity gain stability with an unloaded –3dB bandwidth of 100
MHz. The input common mode voltage range extends from the nega-
tive rail to within 1.5V of the positive rail. Driving a 75double
terminated coaxial cable, the EL5144C series amplifiers drive to
within 150 mV of either rail. The 200 V/µsec slew rate and 0.1% / 0.1°
differential gain / differential phase makes these parts ideal for com-
posite and component video applications. With its voltage feedback
architecture, this amplifier can accept reactive feedback networks,
allowing them to be used in analog filtering applications These ampli-
fiers will source 90 mA and sink 65 mA.
The EL5146C and EL5246C have a power-savings disable feature.
Applying a standard TTL low logic level to the CE (Chip Enable) pin
reduces the supply current to 2.6 µA within 10 nsec. Turn on time is
500 nsec, allowing true break-before-make conditions for multiplex-
ing applications. Allowing the CE pin to float or applying a high logic
level will enable the amplifier.
For applications where board space is critical, singles are offered in a
SOT23-5 package, duals in MSOP-8 and MSOP-10 packages, and
quads in a QSOP-16 package. Singles, duals and quads are also avail-
able in industry standard pinouts in SOIC and PDIP packages. All
parts operate over the industrial temperature range of -40°C to +85°C.
Pin Configurations
OUT 1
GND 2
IN+ 3
SOT23-5
EL5144C
5 VS
4 IN-
NC 1
SOIC-8, PDIP-8
8 CE
IN- 2
IN+ 3
-
+
7 VS
6 OUT
GND 4
EL5146C
5 NC
Dual and Quad Amplifier Pin Configurations on Page 12

PagesPages 20
Télécharger [ EL5146CS ]


Fiche technique recommandé

No Description détaillée Fabricant
EL5146CN 100 MHz Single Supply Rail to Rail Amplifier Elantec Semiconductor
Elantec Semiconductor
EL5146CN 100MHz Single-Supply Rail-to-Rail Amplifiers Intersil Corporation
Intersil Corporation
EL5146CS 100 MHz Single Supply Rail to Rail Amplifier Elantec Semiconductor
Elantec Semiconductor
EL5146CS 100MHz Single-Supply Rail-to-Rail Amplifiers Intersil Corporation
Intersil Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche