DataSheetWiki


5KP7.0 fiches techniques PDF

Diotec Semiconductor - Unidirectional and bidirectional Transient Voltage Suppressor Diodes

Numéro de référence 5KP7.0
Description Unidirectional and bidirectional Transient Voltage Suppressor Diodes
Fabricant Diotec Semiconductor 
Logo Diotec Semiconductor 





1 Page

No Preview Available !





5KP7.0 fiche technique
5 KP 6.5 ... 5 KP 110CA
Unidirectional and bidirectional
Transient Voltage Suppressor Diodes
Unidirektionale und bidirektionale
Spannungs-Begrenzer-Dioden
Dimensions / Maße in mm
Peak pulse power dissipation
Impuls-Verlustleistung
5000 W
Maximum stand-off voltage
Maximale Sperrspannung
6.5...110 V
Plastic case – Kunststoffgehäuse
Ø 8 x 7.5 [mm]
Weight approx. – Gewicht ca.
1.5 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped in ammo pack
see page 16
Standard Lieferform gegurtet in Ammo-Pack siehe Seite 16
For bidirectional types (suffix “C” or “CA”), electrical characteristics apply in both directions.
Für bidirektionale Dioden (Suffix “C” oder “CA”) gelten die el. Werte in beiden Richtungen.
Maximum ratings and Characteristics
Kenn- und Grenzwerte
Peak pulse power dissipation (10/1000 :s waveform)
Impuls-Verlustleistung (Strom-Impuls 10/1000 :s)
Steady state power dissipation
Verlustleistung im Dauerbetrieb
TA = 25/C
TA = 25/C
PPPM
5000 W 1)
PM(AV)
8 W 2)
Peak forward surge current, 60 Hz half sine-wave
Stoßstrom für eine 60 Hz Sinus-Halbwelle
TA = 25/C
IFSM
400 A 3)
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Max. instanteous forward voltage
Augenblickswert der Durchlaßspannung
IF = 100 A
Tj – 50…+175/C
TS – 50…+175/C
VF < 3.5 V 3)
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
RthA < 18 K/W 2)
Thermal resistance junction to lead
Wärmewiderstand Sperrschicht – Anschlußdraht
RthL < 4 K/W
1) Non-repetitive current puls see curve IPPM = f (tr)
Höchstzulässiger Spitzenwert eines einmaligen Strom-Impulses, siehe Kurve IPPM = f (tr)
2) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlußdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden
3) Unidirectional diodes only – Nur für unidirektionale Dioden
07.01.2003
1

PagesPages 4
Télécharger [ 5KP7.0 ]


Fiche technique recommandé

No Description détaillée Fabricant
5KP7.0 TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR General Semiconductor
General Semiconductor
5KP7.0 5000 Watt Transient Voltage Suppressors 5.0 to 110 Volts Micro Commercial Components
Micro Commercial Components
5KP7.0 TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR Dc Components
Dc Components
5KP7.0 TVS Diode (Transient Voltage Suppressor) EIC discrete Semiconductors
EIC discrete Semiconductors

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche