|
|
PDF 5KP14 Data sheet ( Hoja de datos )
| Número de pieza | 5KP14 | |
| Descripción | TVS Diode (Transient Voltage Suppressor) | |
| Fabricantes | Shanghai Sunrise Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 5KP14 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
SHANGHAI SUNRISE ELECTRONICS CO., LTD.
5KP5.0 THRU 5KP110CA
TRANSIENT VOLTAGE SUPPRESSOR
BREAKDOWN VOLTAGE:50-110V
PEAK PULSE POWER: 5000W
TECHNICAL
SPECIFICATION
FEATURES
• 5000W peak pulse power capability
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time:
typically less than 1.0ps from 0V to VBR
for unidirectional and 5.0nS for bidirectional types.
• High temperature soldering guaranteed:
265oC/10S/9.5mm lead length at 5 lbs tension
MECHANICAL DATA
• Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O recognized
flame retardant epoxy
• Polarity: Color band denotes cathode except for
unidirectional types.
• Mounting position: Any
R-6
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25oC ambient temperature unless otherwise specified)
RATINGS
SYMBOL
VALUE
UNITS
Peak power dissipation
(Note 1)
Pppm
Minimum 5000
W
Peak pulse reverse current
(Note 1)
Ippm
See Table
A
Steady state power dissipation
(Note 2) Pm(av)
8.0
W
Peak forward surge current
(Note 3)
IFSM
400 A
Maximum instantaneous forward voltage at 100A
VF
3.5 V
Operating junction and storage temperature range
TSTG,TJ
-55 to + 175
oC
Notes:
1. 10/1000µS waveform non-repetitive current pulse, and derated above Ta=25oC
2. Tl=75oC, lead length 9.5mm, Mounted on copper pad area of (20×20mm)
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.
DEVICES FOR BIDIRECTIONAL APPLICATIONS
1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.
2. For bidirectional use 'C' or 'CA' suffix for types 5KP5.0 thru types 5KP110A
(e.g. 5KP7.5C,5KP110CA), for unidirectional don't use 'C' suffix after types.
3. For bidirectional devices having VWM of 10 volts and less, the ID limit is doubled.
4. Electrical characteristics apply in both directions.
http://www.sse-diode.com
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet 5KP14.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 5KP10 | TRANSIENT ABSORPTION ZENER |  Microsemi Corporation |
| 5KP10 | TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR |  General Semiconductor |
| 5KP10 | 5000 Watt Transient Voltage Suppressors 5.0 to 110 Volts |  Micro Commercial Components |
| 5KP10 | GPP TRANSIENT VOLTAGE SUPPRESSOR |  Rectron Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |