|
|
PDF 5FL2CZ47A Data sheet ( Hoja de datos )
| Número de pieza | 5FL2CZ47A | |
| Descripción | SILICON EPITAXIAL TYPE HIGH EFFICIENCY DIODE STACK | |
| Fabricantes | Toshiba Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 5FL2CZ47A (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
5DL2CZ47A,5FL2CZ47A,5GL2CZ47A
TOSHIBA HIGH EFFICIENCY DIODE STACK (HED) SILICON EPITAXIAL TYPE
5DL2CZ47A, 5FL2CZ47A, 5GL2CZ47A
SWITCHING MODE POWER SUPPLY APPLICATION
CONVERTER & CHOPPER APPLICATION
Unit: mm
z Repetitive Peak Reverse Voltage : VRRM = 200 V, 300 V, 400V
z Average Output Rectified Current : IO = 5 A
z Ultra Fast Reverse-Recovery Time : trr = 35 ns (Max)
z Low Switching Losses and Output Noise.
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
RATING
UNIT
5DL2CZ47A
200
Repetitive Peak
Reverse Voltage
5FL2CZ47A
VRRM
300
V
5GL2CZ47A
400
Average Output Rectified Current
Peak One Cycle Surge Forward
Current (Sin Wave)
Junction Temperature
Storage Temperature Range
Screw Torque
IO
IFSM
Tj
Tstg
―
5
25 (50Hz)
27.5 (60Hz)
−40~150
−40~150
0.6
A
A
°C
°C
N·m
JEDEC
JEITA
TOSHIBA
Weight: 2.0 g
―
―
12−10C1A
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
ELECTRICAL CHARACTERISTICS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
Peak Forward
Voltage (Note 1)
5DL2CZ47A
5FL2CZ47A
5GL2CZ47A
Repetitive Peak
Reverse Current
(Note 1)
5DL2CZ47A
5FL2CZ47A
5GL2CZ47A
Reverse Recovery Time
(Note 1)
Forward Recovery Time
(Note 1)
Thermal Resistance
VFM
IRRM
trr
tfr
Rth (j−c)
Note 1: A value applied to one cell.
TEST CONDITION
IFM = 2.5A
VRRM = Rated
IF = 2A, di / dt = −20A / μs
IF = 1A
Total DC, Junction to Case
TYP.
―
―
―
―
―
―
―
―
―
MAX UNIT
0.98
1.3
1.8
10
10
50
35
100
3.8
V
μA
ns
ns
°C / W
POLARITY
1 2006-11-08
1 page  
5DL2CZ47A,5FL2CZ47A,5GL2CZ47A
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
20070701-EN
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5 2006-11-08
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet 5FL2CZ47A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 5FL2CZ47A | SILICON EPITAXIAL TYPE HIGH EFFICIENCY DIODE STACK | Toshiba Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |