|
|
PDF 5962F9675601VPA Data sheet ( Hoja de datos )
| Número de pieza | 5962F9675601VPA | |
| Descripción | Radiation Hardened/ Ultra High Speed Current Feedback Amplifier with Offset Adjust | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 5962F9675601VPA (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
HS-1120RH
August 1996
Radiation Hardened, Ultra High Speed
Current Feedback Amplifier with Offset Adjust
Features
Description
• Electrically Screened to SMD 5962F9675601VPA
• MIL-PRF-38535 Class V Compliant
• Low Distortion (HD3, 30MHz) . . . . . . . . . . -84dBc (Typ)
• Wide -3dB Bandwidth . . . . . . . . . . . . . . . 850MHz (Typ)
• Very High Slew Rate . . . . . . . . . . . . . . . 2300V/µs (Typ)
• Fast Settling (0.1%) . . . . . . . . . . . . . . . . . . . . 11ns (Typ)
• Excellent Gain Flatness (to 50MHz) . . . . . 0.05dB (Typ)
• High Output Current . . . . . . . . . . . . . . . . . . 65mA (Typ)
• Fast Overdrive Recovery. . . . . . . . . . . . . . . <10ns (Typ)
• Total Gamma Dose. . . . . . . . . . . . . . . . . . 300K RAD (Si)
• Latch Up . . . . . . . . . . . . . . . . . . . None (DI Technology)
Applications
• Video Switching and Routing
• Pulse and Video Amplifiers
• Wideband Amplifiers
• RF/IF Signal Processing
• Flash A/D Driver
• Imaging Systems
The HS-1120RH is a radiation hardened, high speed,
wideband, fast settling current feedback amplifier. These
devices are QML approved and are processed and screened
in full compliance with MIL-PRF-38535. Built with Intersil’
proprietary, complementary bipolar UHF-1 (DI bonded
wafer) process, it is the fastest monolithic amplifier available
from any semiconductor manufacturer.
The HS-1120RH’s wide bandwidth, fast settling
characteristic, and low output impedance, make this
amplifier ideal for driving fast A/D converters. Additionally, it
offers offset voltage nulling capabilities as described in the
“Offset Adjustment” section of this datasheet.
Component and composite video systems will also benefit
from this amplifier’s performance, as indicated by the excel-
lent gain flatness, and 0.03%/0.05 Degree Differential
Gain/Phase specifications (RL = 75Ω).
Detailed electrical specifications are contained in SMD
5962F9675601VPA, available on the Intersil Website or
AnswerFAX systems (document #967560)
A Cross Reference Table is available on the Intersil Website
for conversion of Intersil Part Numbers to SMDs. The address
is (http://www.intersil.com/datasheets/smd/smd_xref.
html). SMD numbers must be used to order Radiation Hard-
ened Products.
Ordering Information
TEMP.
PART NUMBER RANGE (oC) PACKAGE PKG. NO.
5962F9675601VPA -55 to 125 8 Ld CERDIP GDIP1-T8
HFA1100IJ
(Sample)
-40 to 85 8 Ld CERDIP F8.3A
HFA11XXEVAL
Evaluation Board
Pinout
HS-1120RH
MIL-STD-1835, GDIP1-T8
(CERDIP)
TOP VIEW
BAL 1
-IN 2
+IN 3
V- 4
-
+
8 NC
7 V+
6 OUT
5 BAL
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
File Number 4101.1
1 page  
HS-1120RH
Typical Performance Characteristics (Continued)
Device Characterized at: VSUPPLY = ±5V, RF = 360Ω, AV = +2V/V, RL = 100Ω, Unless Otherwise Specified (Continued)
PARAMETERS
CONDITIONS
TEMPERATURE
TYPICAL
Rise and Fall Time
Overshoot (Note 1)
Settling Time (Note 1)
Differential Gain
Differential Phase
Overdrive Recovery Time
VOUT = 0.5VP-P
VOUT = 2VP-P
VOUT = 0.5VP-P, Input tR/tF = 550ps
To 0.1%, VOUT = 2V to 0V, RF = 510Ω
To 0.05%, VOUT = 2V to 0V, RF = 510Ω
To 0.02%, VOUT = 2V to 0V, RF = 510Ω
AV = +2, RL = 75Ω, NTSC
AV = +2, RL = 75Ω, NTSC
RF = 510Ω, VIN = 5VP-P
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
500
800
11
11
19
34
0.03
0.05
7.5
NOTE:
1. See Typical Performance Curve for more information.
UNITS
ps
ps
%
ns
ns
ns
%
Degrees
ns
Typical Performance Curves VSUPPLY = ±5V, RF = 510Ω, RL = 100Ω, TA = +25oC, Unless Otherwise Specified
120
90
60
30
0
-30
-60
-90
-120
5ns/DIV.
FIGURE 4. SMALL SIGNAL PULSE RESPONSE (AV = +2)
1.2
0.9
0.6
0.3
0
-0.3
-0.6
-0.9
-1.2
5ns/DIV.
FIGURE 5. LARGE SIGNAL PULSE RESPONSE (AV = +2)
0
-3
-6
-9
-12
0.3
GAIN
PHASE
AV = +1
AV = +2
AV = +6
AV = +11
AV = +1
AV = +2
AV = +6
AV = +11
1 10 100
FREQUENCY (MHz)
0
-90
-180
-270
-360
1K
FIGURE 6. NON-INVERTING FREQUENCY RESPONSE
(VOUT = 200mVP-P)
GAIN
0
-3 AV = -1
-6 AV = -5
AV = -10
-9
AV = -20
-12
PHASE
0.3 1
AV = -1
AV = -5
AV = -10
AV = -20
10 100
FREQUENCY (MHz)
FIGURE 7. INVERTING FREQUENCY RESPONSE
(VOUT = 200mVP-P)
180
90
0
-90
-180
1K
5
5 Page 
Die Characteristics
DIE DIMENSIONS:
63 mils x 44 mils x 19 mils ±1 mil
1600µm x 1130µm x 483µm ±25.4µm
METALLIZATION:
Type: Metal 1: AICu(2%)/TiW
Thickness: Metal 1: 8kÅ ±0.4kÅ
Type: Metal 2: AICu(2%)
Thickness: Metal 2: 16kÅ ±0.8kÅ
Metallization Mask Layout
V-
HS-1120RH
GLASSIVATION:
Type: Nitride
Thickness: 4kÅ ±0.5kÅ
WORST CASE CURRENT DENSITY:
1.6 x 105 A/cm2
TRANSISTOR COUNT: 52
SUBSTRATE POTENTIAL (Powered Up): Floating
HS-1120RH
+IN
-IN
VL
BAL
OUT
BAL
VH
V+
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet 5962F9675601VPA.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 5962F9675601VPA | Radiation Hardened/ Ultra High Speed Current Feedback Amplifier with Offset Adjust | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |