DataSheetWiki


BA5415A fiches techniques PDF

ROHM Semiconductor - High-output dual power amplifier

Numéro de référence BA5415A
Description High-output dual power amplifier
Fabricant ROHM Semiconductor 
Logo ROHM Semiconductor 





1 Page

No Preview Available !





BA5415A fiche technique
Audio ICs
High-output dual power amplifier
BA5415A / BA5416
The BA5415A and BA5416 are dual power amplifier ICs that operate off a 9V to 15V supply. When driving a 4load
off a 9V supply, the BA5415A does not require a heatsink. The BA5416 uses a lost-cost package. The basic characteris-
tics (total harmonic distortion etc.) of the amplifiers are excellent, and both ICs include a standby switch function.
FApplications
Radio cassette players.
FFeatures
1) High output.
POUT = 5.4W (VCC = 12V, RL = 3and THD = 10%)
POUT = 2.5W (VCC = 9V, RL = 4and THD = 10%)
2) Excellent audio quality.
THD = 0.1% (f = 1kHz, PO = 0.5W)
VNO = 0.3mVrms (Rg = 10k)
RR = 60dB (fRR = 100Hz)
3) Wide operating power suppy voltage range.
VCC = 5.0V to 18.0V (BA5416: 5.0V to 15.0V)
4) Switching noise (“pop” noise) generated when the
power is switched on and off is small.
5) Ripple mixing when motor starts has been pre-
vented.
6) Built-in thermal shutout.
7) Built-in standby switch. Output is not influenced by
the standby pin voltage.
8) “On” mute time does not depend on VCC.
9) Soft clipping.
10) Heatsink not required (for BA5415A, with VCC = 9V
and RL y 4).
FAbsolute maximum ratings (Ta = 25_C)
FRecommended operating conditions (Ta = 25_C)
395

PagesPages 10
Télécharger [ BA5415A ]


Fiche technique recommandé

No Description détaillée Fabricant
BA5415 High-output dual power amplifier ROHM Semiconductor
ROHM Semiconductor
BA5415A High-output dual power amplifier ROHM Semiconductor
ROHM Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche