|
|
PDF BA3812L Data sheet ( Hoja de datos )
| Número de pieza | BA3812L | |
| Descripción | 5-channel graphic equalizer | |
| Fabricantes | ROHM Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BA3812L (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
Audio ICs
5-channel graphic equalizer
BA3812L
The BA3812L is a five-point graphic equalizer that has all the required functions integrated onto one IC. The IC is com-
prised of the five tone control circuits and input and output buffer amplifiers.
The BA3812L features low distortion, low noise, and wide dynamic range, and is an ideal choice for Hi-Fi stereo applica-
tions. It also has a wide operating voltage range (3.5V to 16V), which means that it can be adapted for use with most
types of stereo equipment.
The five center frequencies are independently set using external capacitors, and as the output stage buffer amplifier and
tone control section are independent circuits, fine control over a part of the frequency bandwidth is possible, By using
two BA3812Ls, it is possible to construct a 10-point graphic equalizer.
The amount of boost and cut can be set by external components.
FApplications
Radio cassette players, home stereo systems and car stereo systems.
FFeatures
1) Minimizes the number of components required to
build a graphic equalizer.
2) Low distortion and low noise.
3) Wide operating power supply voltage range (3.5V to
16V).
FAbsolute maximum ratings (Ta = 25_C)
4) Low current dissipation (5 mA).
5) Wide dynamic range (VOM = 2.1Vrms / VCC = 8V).
6) Built-in input and output buffer amplifiers.
FRecommended operating conditions (Ta = 25_C)
445
1 page  
Audio ICs
FSolid-state inductor
A solid state inductor uses an active element and has the
equivalent function of an inductor. The circuit shown in
Fig. 4 is used in the BA3812L. This circuit employs two
capacitors, a potentiometer, and a bias capacitor as ex-
ternal components, everything else is on the chip.
The resonance frequency (fo) and the Q of the circuit are
fixed by the values of the external capacitors.
The circuit Q is obtained from the following formula:
Q = CR1
CO RO
BA3812L
The resonance frequency is obtained from the following
formula:
1
fo (Hz) =
(R: Ω, C: F)
2π R0R1CC0
Q is the factor that determines the bandwidth of the fre-
quency. If the amount of boost and cut are the same for
the same resonance frequency, the larger the value of Q,
the narrower the resonant frequency band.
FElectrical characteristic curves
449
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet BA3812L.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BA3812L | 5-channel graphic equalizer | ROHM Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |