DataSheetWiki


B4S fiches techniques PDF

Pan Jit International Inc. - MINI SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER(VOLTAGE - 100 to 1000 Volts CURRENT - 0.5 Amperes)

Numéro de référence B4S
Description MINI SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER(VOLTAGE - 100 to 1000 Volts CURRENT - 0.5 Amperes)
Fabricant Pan Jit International Inc. 
Logo Pan Jit International Inc. 





1 Page

No Preview Available !





B4S fiche technique
DATA SHEET
B1S~B10S
MINI SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
VOLTAGE - 100 to 1000 Volts CURRENT - 0.5 Amperes
FEATURES
• Plastic material used carries Underwriters
• Laboratory recognition 94V-O
• Low leakage
• Surge overload rating-- 30 amperes peak
• Ideal for printed circuit board
• Exceeds environmental standards of MIL-S-19500
MDI
.275 (7) MAX
.165 (4.2)
.150 (3.8)
Unit: inch ( mm )
.106 (2.7)
.090 (2.3)
MECHANICALDATA
Case: Reliable low cost construction utilizing molded plastic technique results in
inexpensive product
Terminals: Lead solderable per MIL-STD-202, Method 208.
Polarity: Polarity symbols molded or marking on body.
Mounting Position: Any.
Weight: 0.008 ounce, 0.22 gram.
.008 (.20)
.067 (1.7)
.057 (1.3)
C .02(5)
.051 (1.3)
.035 (0.9)
.043 (1.1)
.027 (0.7)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, Resistive or inductive load.
For capacitive load, derate current by 20%
Maximum Recurrent Peak Reverse Voltage
B1S B2S
100 200
B4S B6S
B8S
B10S
UNIT
400 600 800 1000
V
Maximum RMS Bridge input Voltage
70 140 280 420 560 700
V
Maximum DC Blocking Voltage
100 200 400 600 800 1000
V
Maximum Average Forward on glass-epoxy P.C.B (Note 1)
Current TA=30°C
on aluminum substrate (Note 3)
0.5 A
0.8
Peak Forward Surge Current, 8.3ms singlehalf sine-wave
superimposed on rated load
30.0
A
I2t Rating for fusing ( t < 8.35 ms)
5.0
A2t
Maximum Forward Voltage Drop per Bridge Element at 0.5A
1.00
V
Maximum Reverse Current at Rated TJ= 25°C
DC Blocking Voltage per element TJ=125°C
5.0 µA
mA
Typical Junction capacitance per leg (Note 1) CJ
25.0
pF
Typical Thermal resistance per leg (Note 2) RθJA
Typical Thermal resistance per leg (Note 2) RθJA
Operating Temperature Range TJ
85.0
-55 to 150
°C/W
°C
Storage Temperature Range TA
-55 to 150
°C
NOTES:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
2. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.05 X 0.05"(13 x 13mm) copper pads.
3. On alum: substrate P.C.B with an rea of 0.8 x 0.8 x 0.25” ( 20 x 20 x 6.4mm ) mounte on 0.05 x 0.05 “( 13 x 13 mm ) solder pad.
PAGE . 1

PagesPages 2
Télécharger [ B4S ]


Fiche technique recommandé

No Description détaillée Fabricant
B4-A350X 2-Electrode-Arrester EPCOS
EPCOS
B40-1500R SILICON BRIDGE RECTIFIERS EIC discrete Semiconductors
EIC discrete Semiconductors
B40-35-10 Diode ( Rectifier ) American Microsemiconductor
American Microsemiconductor
B40-35-10L Diode ( Rectifier ) American Microsemiconductor
American Microsemiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche