|
|
PDF ECG055B Data sheet ( Hoja de datos )
| Número de pieza | ECG055B | |
| Descripción | The Communications Edge | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ECG055B (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
ECG055Bwww.DataSheet4U.com
InGaP HBT Gain Block
Product Features
• DC – 3 GHz
• +18 dBm P1dB at 1 GHz
• +34 dBm OIP3 at 1 GHz
• 20.5 dB Gain at 1 GHz
• 3.4 dB Noise Figure
• Available in Lead-free / green
SOT-89 Package Style
• Internally matched to 50 Ω
Applications
• Mobile Infrastructure
• CATV / FTTX
• W-LAN / ISM
• RFID
• WiMAX / WiBro
Product Description
Functional Diagram
The ECG055B is a general-purpose buffer amplifier that
offers high dynamic range in a low-cost surface-mount
package. At 1000 MHz, the ECG055B typically provides
20.5 dB of gain, +34 dBm Output IP3, and +18 dBm P1dB.
GND
4
The ECG055B consists of Darlington pair amplifiers using
the high reliability InGaP/GaAs HBT process technology
and only requires DC-blocking capacitors, a bias resistor,
and an inductive RF choke for operation. The device is
ideal for wireless applications and is available in low-cost,
surface-mountable plastic lead-free/green/RoHS-compliant
SOT-89 packages. A SOT-86 version is also available as
the ECG055C. All devices are 100% RF and DC tested.
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDMA, and W-CDMA. In addition,
the ECG055B will work for other various applications
within the DC to 3 GHz frequency range such as CATV
and mobile wireless.
1
RF IN
2
GND
3
RF OUT
Function
Input
Output/Bias
Ground
Pin No.
1
3
2, 4
Specifications (1)
Typical Performance (1)
Parameter
Operational Bandwidth
Test Frequency
Gain
Output P1dB
Output IP3 (2)
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (2)
Noise Figure
Device Voltage
Device Current
Units
MHz
MHz
dB
dBm
dBm
MHz
dB
dB
dB
dBm
dBm
dB
V
mA
Min
DC
19.3
+30
4.2
Typ
1000
20.5
+18
+34
2000
20.1
20
12.5
+18
+32
3.4
4.8
65
Max
3000
20.8
4
5.3
1. Test conditions unless otherwise noted: 25 ºC, Supply Voltage = +6 V, Rbias = 18 Ω, 50 Ω System.
2. 3OIP measured with two tones at an output power of +4 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3
Noise Figure
Units
MHz
dB
dB
dB
dBm
dBm
dB
Typical
500 900 1900 2140
20.6 20.5 20.1 20.1
-31 -26.3 -19.7 -18.5
-23 -19.1 -12.9 -12.2
+18 +18.1 +18.2 +17.8
+34 +34 +32 +30.5
3.6 3.4 3.4 3.4
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
RF Input Power (continuous)
Device Current
Junction Temperature
Rating
-40 to +85 °C
-65 to +150 °C
+12 dBm
150 mA
+250 °C
Ordering Information
Part No.
ECG055B-G
ECG055B-PCB
Description
InGaP HBT Gain Block
(lead-free/green/RoHS-compliant SOT-89 package)
700 –2400 MHz Fully Assembled Eval. Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
Page 1 of 4 April 2007
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet ECG055B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ECG055 | The Communications Edge | ETC |
| ECG055B | The Communications Edge | ETC |
| ECG055B-G | The Communications Edge | ETC |
| ECG055B-PCB | The Communications Edge | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |