|
|
PDF ECG015B Data sheet ( Hoja de datos )
| Número de pieza | ECG015B | |
| Descripción | 1/4 Watt/ High Linearity InGaP HBT Amplifier | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ECG015B (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
ECG015
¼ Watt, High Linearity InGaP HBT Amplifier
The Communications Edge TM
Product Information
Product Features
• 1800 – 2500 MHz
• +24 dBm P1dB
• +41 dBm OIP3
• 15 dB Gain
• 5 dB Noise Figure
• Single Positive Supply (+8V)
• Available in a lead-free / green
SOT-89 Package Style
Applications
• Mobile Infrastructure
• W-LAN / ISM
• RFID
• Defense / Homeland Security
• Fixed Wireless
Product Description
The ECG015 is a high dynamic range driver amplifier in a
low-cost surface mount package. The InGaP/GaAs HBT is
able to achieve performance over a broad range with +41
dBm OIP3 and +24 dBm of compressed 1dB power and is
housed in a lead-free/green/RoHS-compliant SOT-89 SMT
package. All devices are 100% RF and DC tested.
The product is targeted for use as a gain block/driver
amplifier for various current and next generation wireless
technologies such as GPRS, UMTS and WCDMA, where
high linearity and medium power is required. In addition,
the ECG015 will work for numerous other applications
within the 1800 to 2500 MHz frequency range.
Functional Diagram
GND
4
123
RF IN GND RF OUT
ECG015B / ECG015B-G
Specifications (1)
Typical Performance (3)
Parameter
Operational Bandwidth
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (2)
Noise Figure
Device Voltage
Device Current
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dB
V
mA
Min
1800
13.5
+22
+37.5
85
Typ
2140
15
17
10
+24
+41
5
5
100
Max
2500
135
1. Test conditions unless otherwise noted: 25 °C, Vsupply = +8V, in tuned application circuit with
Rbias = 30 Ω.
2. 3OIP measured with two tones at an output power of +9Bm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3 (2)
Noise Figure
Units
MHz
dB
dB
dB
dBm
dBm
dB
1900
21
-15
-10
+24
+41
5
Typical
2140
15
-17
-10
+24
+41
5
2450
14
-19
-10
+23
+42
5
3. Typical parameters reflect performance in a tuned application circuit: Supply Voltage = +8 V, Icc =
100 mA, +25° C, Rbias = 30 Ω.
Absolute Maximum Rating
Ordering Information
Parameter
Operating Case Temperature
Storage Temperature
Device Current
RF Input Power (continuous)
Junction Temperature
Rating
-40 to +85 °C
-55 to +125 °C
180 mA
+15 dBm
+250 °C
Part No.
Description
ECG015B
0.2 Watt, High Linearity InGaP HBT Amplifier
(leaded SOT-89 Pkg)
ECG015B-G
0.2 Watt, High Linearity InGaP HBT Amplifier
(lead-free/green/RoHS-compliant SOT-89 Pkg)
ECG015B-PCB1900 1900 MHz Fully Assembled Eval. Board
ECG015B-PCB2140 2140 MHz Fully Assembled Eval. Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
September 2004
1 page  
ECG015
¼ Watt, High Linearity InGaP HBT Amplifier
The Communications Edge TM
Product Information
ECG015B (Green / Lead-free SOT-89 Package) Mechanical Information
This package is lead-free/Green/RoHS-compliant. It is compatible with both lead-free (maximum 260°C reflow temperature) and leaded
(maximum 245°C reflow temperature) soldering processes.
Outline Drawing
Product Marking
The component will be marked with an “E015G”
designator with an alphanumeric lot code on the
top surface of the package.
Tape and reel specifications for this part are
located on the website in the “Application Notes”
section.
ESD / MSL Information
ESD Rating:
Value:
Test:
Standard:
Class 1B
Passes at between 500 and 1000V
Human Body Model (HBM)
JEDEC Standard JESD22-A114
MSL Rating: Level 3 at +260 °C convection reflow
Standard: JEDEC Standard J-STD-020
Land Pattern
Mounting Config. Notes
1. Ground / thermal vias are critical for the proper
performance of this device. Vias should use a .35mm (#80
/ .0135”) diameter drill and have a final plated thru
diameter of .25 mm (.010”).
2. Add as much copper as possible to inner and outer layers
near the part to ensure optimal thermal performance.
3. Mounting screws can be added near the part to fasten the
board to a heatsink. Ensure that the ground / thermal via
region contacts the heatsink.
4. Do not put solder mask on the backside of the PC board in
the region where the board contacts the heatsink.
5. RF trace width depends upon the PC board material and
construction.
6. Use 1 oz. Copper minimum.
7. All dimensions are in millimeters (inches). Angles are in
degrees.
Thermal Specifications
Parameter
Rating
Operating Case Temperature
Thermal Resistance, Rth (1)
Junction Temperature, Tjc (2)
-40 to +85° C
128° C / W
149° C
Notes:
1. The thermal resistance is referenced from the
junction-to-case at a case temperature of 85° C.
2. This corresponds to the typical biasing condition of
+5V, 100 mA at an 85° C case temperature. A
minimum MTTF of 1 million hours is achieved for
junction temperatures below 247° C.
MTTF vs. GND Tab Temperature
100000
10000
1000
100
60
70 80 90 100 110 120
Tab Temperature (°C)
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com
September 2004
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet ECG015B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ECG015 | 1/4 Watt/ High Linearity InGaP HBT Amplifier | ETC |
| ECG015B | 1/4 Watt/ High Linearity InGaP HBT Amplifier | ETC |
| ECG015B-G | 1/4 Watt/ High Linearity InGaP HBT Amplifier | ETC |
| ECG015B-PCB1900 | 1/4 Watt/ High Linearity InGaP HBT Amplifier | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |