DataSheetWiki


DF22AL-1DEP-7.92DSA fiches techniques PDF

Hirose Electric - 7.92 mm Contact Pitch/ High-Current Connectors for Internal Power Supplies (UL/ C-UL and TUV Listed)

Numéro de référence DF22AL-1DEP-7.92DSA
Description 7.92 mm Contact Pitch/ High-Current Connectors for Internal Power Supplies (UL/ C-UL and TUV Listed)
Fabricant Hirose Electric 
Logo Hirose Electric 





1 Page

No Preview Available !





DF22AL-1DEP-7.92DSA fiche technique
NEW
7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
DF22 Series
Complete
Locking
Function
Completely
enclosed
locking system
Protection from
shorts circuits
between adjacent
Contacts
sFeatures
1. 30 A maximum current
Single position connector can carry current of 30 A with #10 AWG
conductor. Please refer to Table #1 for current ratings for multi-
position connectors using other conductor sizes.
2. Complete Locking Function
Reliable interior lock protects mated connectors from
accidental disconnection.
3. Prevention of Incorrect Connections
To prevent incorrect connection when using multiple connectors
having the same Number of contacts, 3 product types having
different mating configurations are available.
4. Molded-in contact retention tabs
Handling of terminated contacts during the crimping is easier
and avoids entangling of wires, since there are no protruding
metal tabs.
5. Prevention of incorrect board placement
Built-in posts assure correct connector placement and
orientation on the board.
6. Supports encapsulation
Connectors can be encapsulated up to 10 mm without affecting
the performance.
7. Prevention of Short Circuits Between Adjacent Contacts
Each Contact is completely surrounded by the insulator
housing electrically isolating it from adjacent contacts.
8. Increased Retention Force of Crimped Contacts and
confirmation of complete contact insertion
Separate contact retainers are provided for applications where
extreme pull-out forces may be applied against the wire or when a
visual confirmation of the full contact insertion is required.
9. Full Line of Crimp Socket Contacts
Realizing the market needs for multitude of different applications, Hirose
has developed several variants of crimp socket contacts and housings.
Continuous development is adding different variations. Contact your
nearest Hirose Electric representative for latest developments.
10. In-line Connections
Connectors can be ordered for in-line cable connections. In addition,
assemblies can be placed next to each other allowing 4 position total
(2 2) in a small space.
11. Listed by UL, C-UL, and TÜV.
Prevention of Incorrect Connections
qR Type (Guide key: right side, Color: black)
qStandard Type (Guide key: inside, Color: natural)
qL Type (Guide key: left side, Color: red)
*The photographs on the left show header (the board dip side),
the photographs on the right show the socket (cable side).
*The guide key position is indicated in position facing
the mating surface of the header.
sApplications
Office equipment, power supplies for industrial, medical
and instrumentation applications, variety of consumer
electronic, and electrical applications.
2004.5
1

PagesPages 15
Télécharger [ DF22AL-1DEP-7.92DSA ]


Fiche technique recommandé

No Description détaillée Fabricant
DF22AL-1DEP-7.92DS 7.92 mm Contact Pitch/ High-Current Connectors for Internal Power Supplies (UL/ C-UL and TUV Listed) Hirose Electric
Hirose Electric
DF22AL-1DEP-7.92DSA 7.92 mm Contact Pitch/ High-Current Connectors for Internal Power Supplies (UL/ C-UL and TUV Listed) Hirose Electric
Hirose Electric

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche