DataSheetWiki


DS485TM fiches techniques PDF

National Semiconductor - Low Power RS-485/RS-422 Multipoint Transceiver

Numéro de référence DS485TM
Description Low Power RS-485/RS-422 Multipoint Transceiver
Fabricant National Semiconductor 
Logo National Semiconductor 





1 Page

No Preview Available !





DS485TM fiche technique
July 1998
DS485
Low Power RS-485/RS-422 Multipoint Transceiver
General Description
The DS485 is a low-power transceiver for RS-485 and
RS-422 communication. The device contains one driver and
one receiver. The drivers slew rate allows for operation up to
2.5 Mbps (see Applications Information section).
The transceiver draws 200 µA of supply current when un-
loaded or fully loaded with the driver disabled and operates
from a single +5V supply.
The driver is short-circuit current limited and is protected
against excessive power dissipation by thermal shutdown
circuitry that places the driver outputs into TRI-STATE®
(High Impedance state) under fault conditions. The driver
guarantees a minimum of 1.5V differential output voltage
with maximum loading across the common mode range
(VOD3).
The receiver has a failsafe feature that guarantees a
logic-high output if the input is open circuit.
The DS485 is available in surface mount and DIP packages
and is characterized for Industrial and Commercial tempera-
ture range operation.
Features
n Meets TIA/EIA RS-485 multipoint standard
n Guaranteed full load output voltage (V OD3)
n Low quiescent current: 200 µA typ
n −7V to +12V common-mode input voltage range
n TRI-STATE outputs on driver and receiver
n AC performance:
— Driver transition time: 25 ns typ
— Driver propagation delay: 40 ns typ
— Driver skew: 1 ns typ
— Receiver propagation delay: 200 ns typ
— Receiver skew: 20 ns typ
n Half-duplex flow through pinout
n Operates from a single 5V supply
n Allows up to 32 transceivers on the bus
n Current-limiting and thermal shutdown for driver
overload protection
n Industrial temperature range operation
n Pin and functional compatible with MAX485 and LTC485
Connection and Logic Diagram
DIP and SOIC
DS012880-1
Order Number
DS485N
DS485M
DS485TN
DS485TM
Temp. Range
0˚C to +70˚C
0˚C to +70˚C
−40˚C to +85˚C
−40˚C to +85˚C
Package/###
DIP/N08E
SOP/M08A
DIP/N08E
SOP/M08A
Truth Table
DRIVER SECTION
RE* DE
XH
XH
XL
RECEIVER SECTION
RE* DE
LL
LL
HX
LL
DI A
HH
LL
XZ
A-B
+0.2V
−0.2V
X
OPEN*
*Note: Non Terminated, Open Input only
X = indeterminate
Z = TRI-STATE
B
L
H
Z
RO
H
L
Z
H
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 1999 National Semiconductor Corporation DS012880
www.national.com

PagesPages 10
Télécharger [ DS485TM ]


Fiche technique recommandé

No Description détaillée Fabricant
DS485TM Low Power RS-485/RS-422 Multipoint Transceiver National Semiconductor
National Semiconductor
DS485TN Low Power RS-485/RS-422 Multipoint Transceiver National Semiconductor
National Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche