EM91865 Datasheet PDF - ELAN Microelectronics Corp
| Part Number | EM91865 | |
| Description | 13 MEMORY TONE/PULSE DIALER WITH HF/ HD/ REDIAL AND VOLUME CONTROL FUNCTION | |
| Manufacturers | ELAN Microelectronics Corp | |
| Logo |  |
|
|
There is a preview and EM91865 download ( pdf file ) link at the bottom of this page. Total 20 Pages | ||
Preview 1 page No Preview Available !
GENERALDESCRIPTION
EM91865
13 MEMORY TONE/PULSE DIALER WITH HF, HD, REDIAL
AND VOLUME CONTROL FUNCTION
Preliminary
The EM91865 are 13 memory tone/pulse switchable dialer with Last Number Redail (LNB) anD SAVE function,
Which are fabricate in CMOS technology with wide operating voltage for both tone and pulse mode. EM91865
consumes very low memory retention current in on hook state. The EM91865 provide necessary functions of
telephone set for application in any environment, such as pulse dialing, tone (DTMF)dialing, handfree dialing. Beside
this, hold, mute and redial function are provide for particular operation. In redial mode EM91865 can auto insert
pause time for application in PABX system. EM91865 also have a special I/O pin - VAO can used tocontrol
the receive volume amplify circuit.
FEATURES
• Volume add Control Function.
• One key Redial Function.
• Flash key is available and have multiple Flash time ( 600 ms, 300 ms, 100 ms ) can be selected.
• Auto Insert Pause Time.
• Tone/Pulse Switchable.
• Pulse mode fixed 10PPS.
• Pulse to tone ( P→T ) key is provided for PABX operation.
• Many options can be selected by R option.
Mode ( Pulse, Tone )
M/B ratio ( 40:60 ; 33:66 )
Auto insert pause time ( enable ; disable )
• 13 sets 16 digits one touch memory, or 3 set one touch and ten set two touch 16 digits memory.
• One set 32 digits SAVE function.
• One set 32 digits LNB redial function.
• Mixed and cascaded dialing.
• Hold and Mute function.
• Hand Free dialing.
• Tone duration and inter -tone pause are fixed at 90 ms.
• Flash pause time are fixed at 600 ms.
• Pulse to Tone pause time are fixed at 3.6sec.
• Uses 3.579545 MHz crystal or ceramic resonator (with built-in capacitor, no need extra capacitor).
• Package in DIP 18 or DIP 16.
Total System
• Operating voltage : 2.0V ~ 5.5V
• Operating current : Tone mode 0.3 mA (typical) ~ 0.5 mA
Pulse mode 0.15 mA (typical) ~ 0.2 mA
• Standby current : 0.01 uA ( typical ) 0.1 uA ( max. )
• Use single clock 3.579545 MHz crystal
* This specification are subject to be changed without notice.
4.28.1999 1
|
| |
 
EM91865
13 MEMORY TONE/PULSE DIALER WITH HF, HD, REDIAL
AND VOLUME CONTROL FUNCTION
Preliminary
Auto Insert Pause Time Function
EM91865 Provides a new function - Auto Insert Pause Time function - for PABX system user. In PABX
system, we usually use a special number to identify the phone want dial out or just a internal phone. So between
the first and second number, the PABX system will switch to central office, that will be few second switch time.
The auto insert pause time function will auto insert the pause time between first and second digit in redialing mode.
This function are provide a pause time to wait PABX switch to Central Office. In fact, the pause time are record
the waiting time of last dialing between the first and second digit. The auto insert pause minimum duration are equal
0 second, maximun duration are equal 3.5 second, and pause duration scale are 0.1 second. So, if the time during
user keying first and second digit are longer than 3.5 seconds, the auto insert pause time will be limited at 3.5 second.
By this function, we can redial the correct number out in PABX system. This function can select enable or disable
by R_option.
Pause(P) key operation
The Pause(P) key is designed to support pause operation in dialing duration. "P" key can be stored in memory
and it will occupy one digital position.
• To select Pulse or Tone mode.
• Off-hook(or turn on HF function), push (d1, d2,....dn, P , k1, k2, ..... ,kn). These numbers will be dialed out
as following sequence :
d1, d2,.....dn, Tp, k1, k2, ..... ,kn (Tp are the pause Time)
SAVE redial memory
The SAVE memory is designed in EM91865 to support digits capacity buffer for second redial, pager, special
memory for memo and other system applications.
Storing : EM91865 support two operating methods to store numbers into SAVE redial memory.
Method 1 :
• To select Pulse or Tone mode.
• Off-hook(or turn on HF function), push d1, d2 ....., dn. The numbers d1, d2,..., dn will be dialed out in Pulse
or Tone mode as selection.
• After dn had been dialed out and push [ST]. SAVE key. If the keying numbers are more than 32 digits that
content of SAVE memory can not be updated. Otherwise, these numbers will be stored into SAVE memory.
Noted : In the [ ] key allows to be omitted.
• SAVE buffer are the length 32 digits number.
Method 2 :
On or Off-hook (or turn on HF function), push ST, d1, d2 ....., dn, [ST], SAVE. If the keying are not over 32 digits,
the numbers d1, d2, ....., dn will be stored in SAVE redial memory automatically.
Dialing
• To select Pulse or Tone mode.
• Off-hook (or turn on HF function or after executing Flash function), first push SAVE key. The numbers stored
in SAVE memory will be dialed out in Pulse or Tone mode as selection.
* This specification are subject to be changed without notice.
4.28.1999 5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for EM91865 electronic component. |
| Information | Total 20 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ EM91865.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| EM91865 | The function is 13 MEMORY TONE/PULSE DIALER WITH HF/ HD/ REDIAL AND VOLUME CONTROL FUNCTION. ELAN Microelectronics Corp | |
| EM91865A | The function is 13 MEMORY TONE/PULSE DIALER WITH HF/ HD/ REDIAL AND VOLUME CONTROL FUNCTION. ELAN Microelectronics Corp | |
| EM91865B | The function is 13 MEMORY TONE/PULSE DIALER WITH HF/ HD/ REDIAL AND VOLUME CONTROL FUNCTION. ELAN Microelectronics Corp | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
EM91
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||