DataSheetWiki


FAN5608HMPX fiches techniques PDF

Fairchild Semiconductor - Serial/Parallel LED Driver with Current-Regulated/ Step-Up DC/DC Converter

Numéro de référence FAN5608HMPX
Description Serial/Parallel LED Driver with Current-Regulated/ Step-Up DC/DC Converter
Fabricant Fairchild Semiconductor 
Logo Fairchild Semiconductor 





1 Page

No Preview Available !





FAN5608HMPX fiche technique
www.fairchildsemi.com
FAN5608
Serial/Parallel LED Driver with Current-Regulated,
Step-Up DC/DC Converter
Features
• Two Independent Channels Drive up to Six LEDs per
Channel
• Adaptive Output Voltage Drive to Maximize Efficiency
• PWM/PFM Mode of Operation of the Boost Circuit
• Up to 85% Efficiency
• Up to 2 × 20mA Output
• Two Built-in DACs for Independent (Digital) Brightness
Control for Both Channels
• LED’s Current Can be Duty-Cycle-Modulated between
0 to 20mA
• Digital, Analog, and PWM Brightness Control
• 2.7V to 5V Input Voltage Range
• 0.5MHz Operating Frequency (8MHz internal clock)
• Soft Start
• Low Shutdown Current: ICC < 1µA
• LED Short Circuit Protection
• Minimal External Components Needed
• Available in space saving 8-lead and 12-lead MLP
Packages.
Applications
• Cell Phones
• Handheld Computers
• PDAs, DSCs, MP3 Players
• Keyboard Backlights
• LED Displays
Description
The FAN5608 LED driver generates regulated output cur-
rents from a battery with input voltage varying between 2.7V
to 5V. An internal NMOS switch drives an external inductor,
and a Schottky diode delivers the inductor’s stored energy to
the load. Proprietary internal circuitry continuously monitors
the currrent on both strings and automatically adjusts the
generated output DC voltage to the lowest minimum value
required by the LEDs string with the highest summarized
forward voltage. This adaptive nature of the FAN5608
ensures operation at the highest possible efficiency. Soft start
circuitry prevents excessive current drawn from the supply
during power on. Any number of LEDs can be connected in
series as long as the summed forward voltages do not exceed
the specified operating output voltage range. Although it is
not required to have an equal number of LEDs connected in
series within each branch, the highest efficiency and best
current regulation is always achieved when an equal number
of LEDs are serially connected.
In the FAN5608 device, two internal two-bit D/A converters
provide independent programmability of each output channel
current. Analog programming of the output current is
also possible in the FAN5608. To do this, ground the "B"
pins and connect a resistor between the "A" pins and a
fixed supply voltage. The output current can then be
programmed to any desired value within its specified range.
The FAN5608DMPX/FAN5608MPX version uses a single
Typical Application
Digital Brightness Control
CIN
2.7V to 5V
L = 4.7µH
DAC Input For CH1
DAC Input For CH2
IND
VIN
A1
B1
A2
B2
IND
VOUT
GND
CH2
CH1
NNCN
4.7µF
VOUT
CIN
2.7V to 5V
L = 4.7µH
DAC Input For CH1
DAC Input For CH2
IND
VIN
A1
B1
A2
B2
IND
NC
GND
CH2
CH1
NC
4.7µF
VOUT
4X4mm MLP-12 Package
with internal Schottky diode
Order Code: FAN5608DHMPX
4X4mm MLP-12 Package
with external Schottky diode
Order Code: FAN5608HMPX
REV. 1.0.3 6/28/04

PagesPages 17
Télécharger [ FAN5608HMPX ]


Fiche technique recommandé

No Description détaillée Fabricant
FAN5608HMPX Serial/Parallel LED Driver with Current-Regulated/ Step-Up DC/DC Converter Fairchild Semiconductor
Fairchild Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche