DataSheetWiki


FAN5602 fiches techniques PDF

Fairchild Semiconductor - Universal (Step-Up/Step-Down) Charge Pump Regulated DC/DC Converter

Numéro de référence FAN5602
Description Universal (Step-Up/Step-Down) Charge Pump Regulated DC/DC Converter
Fabricant Fairchild Semiconductor 
Logo Fairchild Semiconductor 





1 Page

No Preview Available !





FAN5602 fiche technique
www.fairchildsemi.com
FAN5602
Universal (Step-Up/Step-Down) Charge Pump
Regulated DC/DC Converter
Features
• Low Noise Constant Frequency Operation at Heavy Load
• High Efficiency Pulse-Skip (PFM) Operation at Light
Load
• Adaptive Seven Switch Configurations (1:3, 1:2, 2:3, 1:1,
3:2, 2:1, 3:1)
• 92% Peak Efficiency
• Input Voltage Range: 2.7V to 5.5V
• Output Current:3.3V, 200mA at VIN = 3.6V
• ±3% Output Voltage Accuracy
• ICC < 1µA in Shutdown Mode
• 1MHz Operating Frequency
• Shutdown Isolates Output from Input
• Soft-Start Limits Inrush Current at Start-up
• Short Circuit and Over Temperature Protection
• Minimum External Component Count
• No Inductors
Applications
• Cell Phones
• Handheld Computers
• Portable RF Communication Equipment
• Core Supply to Low Power Processors
• Low Voltage DC Bus
• DSP Supplies
Description
The FAN5602 is a universal switched capacitor DC/DC con-
verter capable of step-up or step-down operation. Due to its
unique adaptive fractional switching topology, the device
achieves high efficiency over a wider input/output voltage
range than any of its predecessors. The FAN5602 utilizes
resistance modulated loop control, which produces lower
switching noise than other topologies. Depending upon
actual load conditions, the device automatically switches
between constant frequency and pulse skipping (PFM)
modes of operation in order to extend battery life. The
FAN5602 produces a fixed regulated output within the range
of 2.7V to 5.5V from any type of voltage source. High effi-
ciency is achieved under any input/output voltage conditions
because an internal logic circuitry automatically reconfigures
the system to the best possible topology. Only two 1µF
bucket capacitors and one 10µF output capacitor are needed.
During power on soft start circuitry prevents excessive cur-
rent drawn from the supply. The device is protected against
short circuit and over temperature conditions.
The FAN5602 is available with 3.3V, 4.5V, and 5.0V output
voltage. Any other output voltage option within the 1.5V to
5V range is available upon request. The FAN5602 is avail-
able in 8-lead MSOP and 3x3mm 8-lead MLP packages
Typical Application
Input 2.7V to 5.5V
VIN
1
CIN
C2+
2
CB
3
C2-
GND 4
8
6
FAN5602
7
5
ENABLE
C1+
VOUT
COUT
C1-
REV. 1.1 10/7/04

PagesPages 16
Télécharger [ FAN5602 ]


Fiche technique recommandé

No Description détaillée Fabricant
FAN5601 Regulated Step-Down Charge Pump DC/DC Converter Fairchild Semiconductor
Fairchild Semiconductor
FAN5602 Universal (Step-Up/Step-Down) Charge Pump Regulated DC/DC Converter Fairchild Semiconductor
Fairchild Semiconductor
FAN5602MP33X Universal (Step-Up/Step-Down) Charge Pump Regulated DC/DC Converter Fairchild Semiconductor
Fairchild Semiconductor
FAN5602MP45X Universal (Step-Up/Step-Down) Charge Pump Regulated DC/DC Converter Fairchild Semiconductor
Fairchild Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche