|
|
Número de pieza | FH25-21S-0.3SH | |
Descripción | 0.3 mm Contact Pitch/ 0.9 mm above the board/ Flexible Printed Circuit ZIF Connectors. | |
Fabricantes | Hirose Electric | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de FH25-21S-0.3SH (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! NEW
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
FH 25 Series
3.45mm
(51pos. type)
17.1mm
sFeatures
1. Extremely light weight
The largest version, with all contacts loaded, weights
only 0.11gramms.
2. Conductive traces on the PCB can run
under the connector
No exposed contacts on the bottom of the connector.
3. High density together with reliable solderability on the board
Staggered contact points and the leads plus the nickel
barriers assure sufficient distance to prevents solder
bridging.
4. Easy FPC insertion and reliable electrical connection
Proven Flip Lock® actuator allows easy insertion of FPC.
Tactile sensation when fully closed confirms complete
electrical and mechanical connection.
5. Accepts standard thickness FPC
0.2 mm thick standard Flexible Printed Circuit board can
be used. This is the only ultra-low profile ZIF connector
allowing the use of standard FPC.
6. Board placement with automatic equipment
Flat top surface and packaging on the tape-and-reel
allows use of vacuum nozzles.
Standard reel contains 5,000 connectors.
sApplications
Mobile phones, PDA’s, digital cameras, digital video
cameras, LCD connections, plasma displays (PDP), camera
modules and other compact devices requiring Flexible
Printed Circuit connections using high reliability ultra-small
profile connectors.
No exposed contacts
Metal fittings do not protrude outside of the connector body
Absence of protrusions on each
side of connector allows closer
side-by-side mounting of the
connectors or closer component
placement in miniaturized devices.
Nickel barrier prevents
solder bridges
Mounting pitch
Insulator body
0.6mm
Contacts
0.3mm
Solid bottom surface
FPC
Actuator open
FPC insertion direction
Actuator closed
FPC fully inserted
2004.6
1
1 page BRecommended PCB mounting pattern and metal mask dimensions
FULL R
0.3
A
∞Number of contacts
0.1 H
0.3±0.05 (Land)
0.25±0.05(Metal mask)
Recommended metal mask thickness:
t = 0.1 mm
H
0.4±0.03
B±0.05
BRecommended FPC Dimensions
C±0.05
A±0.03
0.6±0.02
0.3±0.07
(0.05)
(0.2)
0.4±0.03
0.3
+0.04
- 0.03
2-R0.2 MAX
0.2±0.03
0.3±0.02
0.6±0.02
D±0.03
0.3
+0.04
- 0.03
(0.6)
0.6±0.07
Covering film layer
1 Polyamide and thermally hardening adhesive is recommended as the stiffener materials.
2 Overlap between covering film layer and stiffener is 0.5mm min.
Part Number
CL No.
FH25-21S-0.3SH(05)
CL586-1204-3-05
FH25-27S-0.3SH(05)
CL586-1205-6-05
FH25-33S-0.3SH(05)
CL586-1207-1-05
FH25-39S-0.3SH(05)
CL586-1208-4-05
FH25-45S-0.3SH(05)
CL586-1209-7-05
FH25-51S-0.3SH(05)
CL586-1200-2-05
Embossed tape reel packaging (5,000 pieces/reel).
Order by number of reels.
Number of Contacts
21
27
33
39
45
51
A
6.0
7.8
9.6
11.4
13.2
15.0
B
7.2
9.0
10.8
12.6
14.4
16.2
Unit: mm
CD
6.6 5.4
8.4 7.2
10.2
9.0
12.0
10.8
13.8
12.6
15.6
14.4
5
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet FH25-21S-0.3SH.PDF ] |
Número de pieza | Descripción | Fabricantes |
FH25-21S-0.3SH | 0.3 mm Contact Pitch/ 0.9 mm above the board/ Flexible Printed Circuit ZIF Connectors. | Hirose Electric |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |