DataSheetWiki


M22102F1 fiches techniques PDF

STMicroelectronics - WITH CONTROL MEMORY 4 X 4 X 2 CROSSPOINT SWITCHES

Numéro de référence M22102F1
Description WITH CONTROL MEMORY 4 X 4 X 2 CROSSPOINT SWITCHES
Fabricant STMicroelectronics 
Logo STMicroelectronics 





1 Page

No Preview Available !





M22102F1 fiche technique
M22101
M22102
4 X 4 X 2 CROSSPOINT SWITCHES
WITH CONTROL MEMORY
. LOW ON RESISTANCE – 75 TYP AT
VDD = 12 V
. ”BUILT-IN” LATCHED INPUTS
. LARGE ANALOG SIGNAL CAPACITY ± VDD/2
. 10 MHz SWITCH BANDWITH
. MATCHED SWITCH CHARACTERISTICS
. RON = 8 TYP, AT VDD = 12 V
. HIGH LINEARITY – 0.25 % DISTORTION TYP,
. AT f = 1 kHz, VIN = 5 V, VDD - VSS = 10 V AND
RI = 1
STANDARD CMOS NOISE IMMUNITY
DESCRIPTION
The M22101 and M22102 crosspoint switches con-
sist of 4 x 4 x 2 arrays of crosspoints (transmission
gates), 4-line to 16-line decoders, and 16 latch cir-
cuits. Any one of the sixteen crosspoint pairs can be
selected by applying the appropriate four-line ad-
dress and any number of crosspoint pairs can be ON
simultaneously. Corresponding crosspoints in each
array are turned on and OFF simultaneously, also.
Therefore all switches must be turned off by putting
the strobe hight, data-in-low, and the addressing all
switches in succession.
The selected pair of crosspoints in the M22102 is
turned on by applying a logical ONE to the Ka (set)
input while a logical ZERO is on the Kb (reset) input,
and turned off by applying a logical ONE to the Kb
input while a logical ZERO is on the Ka input. In this
respect the control latches of the M22102 are similar
to SET/RESET flip-flops. They differ, however, in
that the simultaneous application of ONEs to the Ka
and Kb inputs turns off (resets) all crosspoints. All
crosspoints in both devices must be turned off as
VDD is applied.
In the M22101, the selected crosspoint pair can be
turned on or off by applying a logical ONE or ZERO,
respectively, to the data input, and applying a ONE
to the strobe input. When the device is ”power-up”,
the state of the 16 switches is indeterminate.
B1
(Plastic Package)
F1
(Ceramic Package)
ORDER CODES :
M22XXX B1
M22XXX F1
PIN CONNECTIONS
September 1988
1/8

PagesPages 8
Télécharger [ M22102F1 ]


Fiche technique recommandé

No Description détaillée Fabricant
M22102F1 WITH CONTROL MEMORY 4 X 4 X 2 CROSSPOINT SWITCHES STMicroelectronics
STMicroelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche