|
|
Numéro de référence | 100352 | ||
Description | Low Power 8-Bit Buffer with Cut-Off Drivers | ||
Fabricant | National Semiconductor | ||
Logo | |||
1 Page
August 1998
100352
Low Power 8-Bit Buffer with Cut-Off Drivers
General Description
The 100352 contains an 8-bit buffer, individual inputs (Dn),
outputs (Qn), and a data output enable pin (OEN). A Q out-
put follows its D input when the OEN pin is LOW. A HIGH on
OEN holds the outputs in a cut-off state. The cut-off state is
designed to be more negative than a normal ECL LOW level.
This allows the output emitter-followers to turn off when the
termination supply is −2.0V, presenting a high impedance to
the data bus. This high impedance reduces termination
power and prevents loss of low state noise margin when sev-
eral loads share the bus.
The 100352 outputs are designed to drive a doubly termi-
nated 50Ω transmission line (25Ω load impedance). All in-
puts have 50 kΩ pull-down resistors.
Features
n Cut-off drivers
n Drives 25Ω load
n Low power operation
n 2000V ESD protection
n Voltage compensated operating range = −4.2V to −5.7V
n Available to industrial grade temperature range
n Available to MIL-STD-883
Logic Symbol
Pin Names
D0– D7
OEN
Q0– Q7
NC
DS100296-1
Description
Data Inputs
Output Enable Input
Data Outputs
No Connect
© 1998 National Semiconductor Corporation DS100296
www.national.com
|
|||
Pages | Pages 8 | ||
Télécharger | [ 100352 ] |
No | Description détaillée | Fabricant |
100350 | Low Power Hex D-Type Latch | Fairchild Semiconductor |
100350PC | Low Power Hex D-Type Latch | Fairchild Semiconductor |
100350QC | Low Power Hex D-Type Latch | Fairchild Semiconductor |
100351 | Low Power Hex D Flip-Flop | National Semiconductor |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |