30GWJ2C42C Datasheet PDF - Toshiba Semiconductor
| Part Number | 30GWJ2C42C | |
| Description | SCHOTTKY BARRIER TYPE (SWITCHING TYPE POWER SUPPLY CONVERTER & CHOPPER APPLICATIONS) | |
| Manufacturers | Toshiba Semiconductor | |
| Logo |  |
|
|
There is a preview and 30GWJ2C42C download ( pdf file ) link at the bottom of this page. Total 5 Pages | ||
Preview 1 page No Preview Available !
30GWJ2C42C
TOSHIBA SCHOTTKY BARRIER RECTIFIER STACK SCHOTTKY BARRIER TYPE
30GWJ2C42C
SWITCHING MODE POWER SUPPLY APPLICATON
CONVERTER & CHOPPER APPLICATION
z Repetitive Peak Reverse Voltage : VRRM = 40 V
z Average Output Rectified Current : IO = 30 A
z Low Switching Losses and Output Noise
Unit: mm
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
RATING
UNIT
Repetitive Peak Reverse Voltage
Repetitive Peak Reverse Surge
Voltage
(Note 1)
VRRM
VRRSM
40
48
V
V
Average Output Rectified Current
Peak One Cycle Surge Forward
Current (Sine Wave)
IO
IFSM
30
300 (50Hz)
330 (60Hz)
A
A
Junction Temperature
Storage Temperature Range
Screw Torque
Tj
−40~125
°C
Tstg
−40~150
°C
― 0.8 N·m
JEDEC
JEITA
―
―
Note 1:
Note 2:
Pulse Width (tw) ≤500ns, duty (tw / T) ≤1 / 25
Using continuously under heavy loads (e.g. the application of
TOSHIBA
12-16D1A
Weight: 4.85 g (typ.)
high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
ELECTRICAL CHARACTERISTICS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
TEST CONDITION
Peak Forward Voltage
(Note 3)
Repetitive Peak Reverse Current
(Note 3)
Junction Capacitance
(Note 3)
Thermal Resistance
VFM
IRRM
Cj
Rth (j-c)
IFM = 15A
VRRM = Rated
VR = 10V, f = 1.0MHz
Total DC, Junction to Case
Note 3: A value applied to one cell.
MIN TYP. MAX
― 0.55
V
― 15 mA
600 ―
pF
― 1.0 °C / W
POLARITY
1 2006-11-10
|
| |
 
30GWJ2C42C
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
030619EAA
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced
and sold, under any law and regulations.
5 2006-11-10
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 30GWJ2C42C electronic component. |
| Information | Total 5 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ 30GWJ2C42C.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| 30GWJ2C42C | The function is SCHOTTKY BARRIER TYPE (SWITCHING TYPE POWER SUPPLY CONVERTER & CHOPPER APPLICATIONS). Toshiba Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
30GW
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||