DataSheetWiki


DAC08A fiches techniques PDF

NXP Semiconductors - 8-Bit high-speed multiplying D/A converter

Numéro de référence DAC08A
Description 8-Bit high-speed multiplying D/A converter
Fabricant NXP Semiconductors 
Logo NXP Semiconductors 





1 Page

No Preview Available !





DAC08A fiche technique
Philips Semiconductors Linear Products
8-Bit high-speed multiplying D/A converter
Product specification
DAC08 Series
DESCRIPTION
The DAC08 series of 8-bit monolithic multiplying Digital-to-Analog
Converters provide very high-speed performance coupled with low
cost and outstanding applications flexibility.
Advanced circuit design achieves 70ns settling times with very low
glitch and at low power consumption. Monotonic multiplying
performance is attained over a wide 20-to-1 reference current range.
Matching to within 1 LSB between reference and full-scale currents
eliminates the need for full-scale trimming in most applications.
Direct interface to all popular logic families with full noise immunity is
provided by the high swing, adjustable threshold logic inputs.
Dual complementary outputs are provided, increasing versatility and
enabling differential operation to effectively double the peak-to-peak
output swing. True high voltage compliance outputs allow direct
output voltage conversion and eliminate output op amps in many
applications.
All DAC08 series models guarantee full 8-bit monotonicity and
linearities as tight as 0.1% over the entire operating temperature
range. Device performance is essentially unchanged over the ±4.5V
to ±18V power supply range, with 37mW power consumption
attainable at ±5V supplies.
The compact size and low power consumption make the DAC08
attractive for portable and military aerospace applications.
FEATURES
Fast settling output current—70ns
Full-scale current prematched to ±1 LSB
Direct interface to TTL, CMOS, ECL, HTL, PMOS
Relative accuracy to 0.1% maximum over temperature range
High output compliance -10V to +18V
True and complemented outputs
Wide range multiplying capability
Low FS current drift — ±10ppm/°C
Wide power supply range—±4.5V to ±18V
Low power consumption—37mW at ±5V
APPLICATIONS
8-bit, 1µs A-to-D converters
Servo-motor and pen drivers
PIN CONFIGURATIONS
F, N Packages
VLC 1
IO 2
V– 3
IO 4
B1 (MSB) 5
B2 6
B3 7
B4 8
16 COMP
15 VREF–
14 VREF+
13 V+
12 B8 (LSB)
11 B7
10 B6
9 B5
TOP VIEW
D1 Package
V+ 1
VREF+ 2
VREF– 3
COMPEN 4
VLC 5
IO 6
V– 7
IO 8
16 B8 (LSB)
15 B7
14 B6
13 B5
12 B4
11 B3
10 B2
9 B1 (MSB)
TOP VIEW
NOTE:
1. SO and non-standard pinouts.
Waveform generators
Audio encoders and attenuators
Analog meter drivers
Programmable power supplies
CRT display drivers
High-speed modems
Other applications where low cost, high speed and complete in-
put/output versatility are required
Programmable gain and attenuation
Analog-Digital multiplication
August 31, 1994
716 853-0045 13721

PagesPages 12
Télécharger [ DAC08A ]


Fiche technique recommandé

No Description détaillée Fabricant
DAC08 8-Bit high-speed multiplying D/A converter NXP Semiconductors
NXP Semiconductors
DAC08 Multiplying D/A Converter Analog Devices
Analog Devices
DAC0800 8-Bit Digital-to-Analog Converters National Semiconductor
National Semiconductor
DAC0800 DAC0800/DAC0802 8-Bit Digital-to-Analog Converters (Rev. C) Texas Instruments
Texas Instruments

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche