|
|
PDF D44H10 Data sheet ( Hoja de datos )
| Número de pieza | D44H10 | |
| Descripción | COMPLEMENTARY SILICON POWER TRANSISTORS | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de D44H10 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
D44H Series (NPN),
D45H Series (PNP)
Preferred Devices
Complementary Silicon
Power Transistors
These series of plastic, silicon NPN and PNP power transistors can
be used as general purpose power amplification and switching such as
output or driver stages in applications such as switching regulators,
converters and power amplifiers.
Features
• Low Collector−Emitter Saturation Voltage
VCE(sat) = 1.0 V (Max) @ 8.0 A
• Fast Switching Speeds
• Complementary Pairs Simplifies Designs
• Pb−Free Packages are Available*
MAXIMUM RATINGS
Rating
Symbol Value
Unit
Collector−Emitter Voltage
D44H8, D45H8
D44H11, D45H11
VCEO
Vdc
60
80
Emitter Base Voltage
Collector Current
− Continuous
− Peak (Note 1)
VEB 5.0 Vdc
IC Adc
10
20
Total Power Dissipation
@ TC = 25°C
@ TA = 25°C
PD W
70
2.0
Operating and Storage Junction
Temperature Range
TJ, Tstg −55 to +150 °C
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction−to−Case
RqJC
1.8 _C/W
Thermal Resistance, Junction−to−Ambient RqJA
62.5 _C/W
Maximum Lead Temperature for Soldering
Purposes: 1/8″ from Case for 5 Seconds
TL
275 _C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. Pulse Width v 6.0 ms, Duty Cycle v 50%.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
February, 2006 − Rev. 9
1
http://onsemi.com
10 AMP COMPLEMENTARY
SILICON POWER
TRANSISTORS 60, 80 VOLTS
4 MARKING
DIAGRAM
1
2
3
TO−220AB
CASE 221A−09
STYLE 1
D4xHyyG
AYWW
D4xHyy
A
Y
WW
G
= Device Code
x = 4 or 5
yy = 8 or 11
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Device
D44H8
Package
TO−220
Shipping†
50 Units/Rail
D44H8G
D44H11
TO−220
(Pb−Free)
TO−220
50 Units/Rail
50 Units/Rail
D44H11G
TO−220
(Pb−Free)
50 Units/Rail
D45H8
D45H8G
D45H11
TO−220
TO−220
(Pb−Free)
TO−220
50 Units/Rail
50 Units/Rail
50 Units/Rail
D45H11G
TO−220
(Pb−Free)
50 Units/Rail
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
D44H/D
1 page  
D44H Series (NPN),
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AA
Q
H
Z
B
4
1 23
F
T
−T−
SEATING
PLANE
C
S
A
U
K
L
V
G
N
D
R
J
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
INCHES
DIM MIN MAX
A 0.570 0.620
B 0.380 0.405
C 0.160 0.190
D 0.025 0.035
F 0.142 0.147
G 0.095 0.105
H 0.110 0.155
J 0.018 0.025
K 0.500 0.562
L 0.045 0.060
N 0.190 0.210
Q 0.100 0.120
R 0.080 0.110
S 0.045 0.055
T 0.235 0.255
U 0.000 0.050
V 0.045 −−−
Z −−− 0.080
MILLIMETERS
MIN MAX
14.48 15.75
9.66 10.28
4.07 4.82
0.64 0.88
3.61 3.73
2.42 2.66
2.80 3.93
0.46 0.64
12.70 14.27
1.15 1.52
4.83 5.33
2.54 3.04
2.04 2.79
1.15 1.39
5.97 6.47
0.00 1.27
1.15 −−−
−−− 2.04
STYLE 1:
PIN 1. BASE
2. COLLECTOR
3. EMITTER
4. COLLECTOR
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
5
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
D44H/D
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet D44H10.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| D44H1 | POWER TRANSISTORS(10A/30-80V/50W) |  Mospec Semiconductor |
| D44H1 | COMPLEMENTARY SILICON POWER TRANSISTORS |  Boca Semiconductor Corporation |
| D44H1 | Trans GP BJT NPN 30V 20A 3-Pin(3+Tab) TO-220 |  New Jersey Semiconductor |
| D44H10 | SILICON POWER TRANSISTORS |  RECTRON |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |