DataSheetWiki


DAC8562 fiches techniques PDF

Analog Devices - +5 Volt/ Parallel Input Complete 12-Bit DAC

Numéro de référence DAC8562
Description +5 Volt/ Parallel Input Complete 12-Bit DAC
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





DAC8562 fiche technique
a
FEATURES
Complete 12-Bit DAC
No External Components
Single +5 Volt Operation
1 mV/Bit with 4.095 V Full Scale
True Voltage Output, ؎5 mA Drive
Very Low Power –3 mW
APPLICATIONS
Digitally Controlled Calibration
Servo Controls
Process Control Equipment
PC Peripherals
+5 Volt, Parallel Input
Complete 12-Bit DAC
DAC8562
FUNCTIONAL BLOCK DIAGRAM
REFOUT
VDD
DAC-8562
REF
12-BIT
DAC
12
DAC REGISTER
12
VOUT
AGND
DGND CE
DATA
CLR
GENERAL DESCRIPTION
The DAC8562 is a complete, parallel input, 12-bit, voltage out-
put DAC designed to operate from a single +5 volt supply. Built
using a CBCMOS process, these monolithic DACs offer the
user low cost, and ease-of-use in +5 volt only systems.
Included on the chip, in addition to the DAC, is a rail-to-rail
amplifier, latch and reference. The reference (REFOUT) is
trimmed to 2.5 volts, and the on-chip amplifier gains up the
DAC output to 4.095 volts full scale. The user needs only sup-
ply a +5 volt supply.
The DAC8562 is coded straight binary. The op amp output
swings from 0 to +4.095 volts for a one millivolt per bit resolu-
tion, and is capable of driving ± 5 mA. Built using low tempera-
ture-coefficient silicon-chrome thin-film resistors, excellent
linearity error over temperature has been achieved as shown be-
low in the linearity error versus digital input code plot.
Digital interface is parallel and high speed to interface to the
fastest processors without wait states. The interface is very sim-
ple requiring only a single CE signal. An asynchronous CLR in-
put sets the output to zero scale.
The DAC8562 is available in two different 20-pin packages,
plastic DIP and SOL-20. Each part is fully specified for opera-
tion over –40°C to +85°C, and the full +5 V ± 5% power supply
range.
For MIL-STD-883 applications, contact your local ADI sales
office for the DAC8562/883 data sheet which specifies opera-
tion over the –55°C to +125°C temperature range.
1
0.75
VDD = +5V
TA = –55°C, +25°C, +125°C
0.5
–55°C
0.25
0
–0.25
–0.5
–0.75
+25°C & +125°C
–1
0
1024
2048
3072
DIGITAL INPUT CODE — Decimal
4096
Figure 1. Linearity Error vs. Digital Input Code Plot
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700
Fax: 617/326-8703

PagesPages 16
Télécharger [ DAC8562 ]


Fiche technique recommandé

No Description détaillée Fabricant
DAC8560 16Bit Ultra-Low Glitch Voltage Output DAC with 2.5V 2ppm/ C Internal Ref (Rev. B) Texas Instruments
Texas Instruments
DAC8560 DIGITAL-TO-ANALOG CONVERTER Burr-Brown
Burr-Brown
DAC8562 +5 Volt/ Parallel Input Complete 12-Bit DAC Analog Devices
Analog Devices
DAC8562 DACxx6x Dual 16- 14- 12-Bit Low-Power Buffered Voltage-Output DACs With 2.5-V 4-PPM/ C Internal Reference (Rev. E) Texas Instruments
Texas Instruments

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche