|
|
Número de pieza | HMC392 | |
Descripción | GaAs MMIC LOW NOISE AMPLIFIER/ 3.5 - 7.0 GHz | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC392 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v00.1002
MICROWAVE CORPORATION
1 Typical Applications
The HMC392 is ideal for use as a low noise
amplifier for:
• Point to Point Radios
• VSAT
• LO Driver for HMC Mixers
• Military EW, ECM, C3I
• Space
Functional Diagram
HMC392
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
Features
Gain: 15.5 dB
Noise Figure: 2.4 dB
Single Supply Voltage: +5.0V
50 Ohm Matched Input/Output
No External Components Required
Small Size: 1.3 mm x 1.0 mm x 0.1 mm
General Description
The HMC392 is a GaAs MMIC Low Noise
Amplifier die which operates between 3.5 and 7.0
GHz. The amplifier provides 15.5 dB of gain, 2.4
dB noise figure, and 28 dBm IP3 from a +5.0V
supply voltage. The HMC392 has six bonding
adjustment options which allow the user to select
the bias point and output power of the device (+15
to +18 dBm). The HMC392 amplifier can easily
be integrated into Multi-Chip-Modules (MCMs)
due to its small (1.3 mm2) size. All data is with
the chip in a 50 Ohm test fixture connected via
0.025mm (1 mil) diameter wire bonds of minimal
length 0.31mm (12 mils).
1 - 30
Electrical Specifications, TA = +25° C, Vdd = 5V
Parameter
Min.
Typ.
Max.
Min.
Frequency Range
4.0 - 6.0
Gain
13 15.5
11.5
Gain Variation Over Temperature
0.018
0.025
Noise Figure
2.4 3.0
Input Return Loss
15
Output Return Loss
15
Output Power for 1 dB Compression (P1dB)
13 16
12
Saturated Output Power (Psat)
18
Output Third Order Intercept (IP3)
25 28
23
Supply Current (Idd)
50
Note: Data taken with pads PS4 and PS8 bonded to ground (state 5) unless otherwise noted.
Typ. Max.
3.5 - 7.0
14
0.018
0.025
2.8 3.4
10
10
16
18
28
50
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Units
GHz
dB
dB/ °C
dB
dB
dB
dBm
dBm
dBm
mA
1 page v00.1002
MICROWAVE CORPORATION
HMC392
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
1 Pad Descriptions
Pad Number
Function
2 RF IN
Description
This pad is AC coupled and matched to 50 Ohms
from 3.5 to 7.0 GHz.
Interface Schematic
Power Select
3
4
PS3
PS4
One of these pads must be connected to ground.
See Power Select Table for selection criteria.
Power Select
7
8
PS7
PS8
One of these pads must be connected to ground.
See Power Select Table for selection criteria.
9 PS9
1, 5
Vdd,
Vdd (alt.)
Power supply voltage. Connect either pad1 or pad5 to +5V
supply. No choke inductor or bypass capacitor is needed.
1 - 34
6
Die
Bottom
RF OUT
GND
This pad is AC coupled and matched to 50 Ohms
from 3.5 to 7.0 GHz.
Die bottom must be connected to RF/DC ground.
Power Select Table
State
1
2
3
4
5
6
Pads Bonded to Ground
PS3 & PS7
PS3 & PS8
PS3 & PS9
PS4 & PS7
PS4 & PS8
PS4 & PS9
Typical Idd (mA)
75
62
55
65
50
46
Typical P1dB (dBm)
18.4
17.9
16.4
17.7
16.9
15.5
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC392.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC390LP4 | MMIC VCO w/ BUFFER AMPLIFIER/ 3.55 - 3.9 GHz | Hittite Microwave Corporation |
HMC391LP4 | MMIC VCO w/ BUFFER AMPLIFIER/ 3.9 - 4.45 GHz | Hittite Microwave Corporation |
HMC392 | GaAs MMIC LOW NOISE AMPLIFIER/ 3.5 - 7.0 GHz | Hittite Microwave Corporation |
HMC392LC4 | GaAs MMIC LOW NOISE AMPLIFIER | Hittite Microwave |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |